Axis Communications ANVE Axis Network Video Exam Exam Practice Test

Axis Secure Remote Access simplifies making Axis cameras available over the internet without the need for complex network configurations. This service provides a secure, encrypted connection to access and manage Axis devices remotely. By using Axis Secure Remote Access, users can avoid issues related to NAT traversal and firewall configurations, ensuring a reliable and secure remote connection. Detailed instructions and benefits of using Axis Secure Remote Access are outlined in Axis' support documentation.

The red tip on the cable is used to keep the connectors dust-free prior to installation. It protects the RJ45 connector from dust and debris, ensuring a clean and reliable connection once installed. Maintaining clean connectors is essential for preventing connectivity issues and ensuring optimal network performance. Axis installation guides specify the importance of keeping connectors covered until installation to protect against contamination and ensure a proper connection.

"The Axis lens calculator helps users determine the pixel density at various distances, helping to ensure coverage meets surveillance requirements (such as detection, recognition, and identification)."

— Axis Lens Calculator Tool

"Pixel density calculations are essential for planning surveillance installations and the lens calculator provides this information based on camera and lens parameters."

— Axis Communications Academy, Network Video Fundamentals, 2022

For a 1920x1080 camera, the pixel density at a distance of 3 meters (10 feet) can be calculated using the formula for pixel density (pixels per meter/foot). Given the resolution and distance, the pixel density is 162 pixels per meter (54 pixels per foot). Axis provides guidelines and tools for calculating pixel density to ensure the camera setup meets the required image quality for identification and recognition purposes in their technical resources and planning tools.

"A key advantage of server-based storage is that the servers can be installed in secure, access-controlled locations, improving the physical security of recorded video data."

— Axis Video Surveillance Storage White Paper

"Server-based storage allows for secure placement and centralized management."

— Axis Communications Academy, Network Video Fundamentals, 2022

Electronic image stabilization (EIS) helps reduce the bandwidth for a camera by stabilizing the video feed, especially in scenarios where the camera is mounted on a pole or other structure susceptible to vibrations. EIS compensates for camera shake and movement, resulting in smoother video and less variation in the scene, which in turn reduces the amount of data required for compression and transmission. References: Axis Communications documentation on electronic image stabilization and its benefits.

To minimize the risk of losing recordings if there is a disconnect between the camera and the server, failover recordings are recommended. This involves having a secondary recording location, such as an SD card in the camera, that can store video footage temporarily until the connection to the server is restored. This ensures continuous recording and prevents data loss. Axis Communications' documentation on system reliability and failover solutions supports this recommendation.

"Signed firmware guarantees that the installed operating system is genuinely from Axis and has not been tampered with. The camera verifies the firmware signature before installation or upgrade."

— Axis Communications, Signed Firmware

"With signed firmware, you are assured that the firmware is authentic and has not been modified."

— Axis Communications Academy, Network Video Fundamentals, 2022

"The image shows a coaxial cable terminated with a BNC (Bayonet Neill–Concelman) connector. This type of connection is commonly used for analog video and some specialized network applications such as Axis video encoders."

— Axis Communications Academy, Network Video Fundamentals, 2022

"BNC connectors are standard for coaxial cabling in CCTV and video encoder installations."

— Axis Video Encoder Product Page

Concrete has the lowest reflectance among the listed surfaces. Reflectance refers to the ability of a surface to reflect light, and concrete typically reflects less light compared to sand, grass, or snow. This characteristic is important for surveillance in terms of minimizing glare and ensuring better image quality. Axis Communications' documentation on environmental considerations supports this information.

Routers use IP addresses to determine where to send data packets. IP addresses provide the unique identification needed for routing data across networks, enabling the router to direct packets to their correct destinations. This fundamental aspect of network communication is outlined in Axis Communications' documentation on network protocols and IP-based systems.

The main purpose of an HDMI output on a camera is for connecting to a public view monitor (PVM). This allows live video feed from the camera to be displayed directly on monitors in public areas, which can act as a deterrent against theft or unwanted behavior. Axis documentation states that HDMI outputs are used to provide real-time video display for public viewing, enhancing security presence and situational awareness.

"An IR-pass filter blocks visible light and allows only infrared light to reach the camera sensor. This is commonly used for dedicated infrared imaging applications."

— Axis IR Filter Technologies

"An IR-cut filter, by contrast, blocks infrared light and lets visible light through."

— Axis Communications Academy, Network Video Fundamentals, 2022

"Box cameras are designed to be versatile and typically feature C or CS-mounts, allowing users to select from a range of lenses to suit their surveillance needs."

— Axis Communications Academy, Network Video Fundamentals, 2022

"A box camera uses interchangeable C or CS-mount lenses, offering flexibility in lens choice depending on the application."

— Axis Box Cameras Overview

Keeping firmware up to date helps a device stay as cybersecure as possible by addressing vulnerabilities and incorporating security patches. Regular updates ensure that the device is protected against the latest threats. Additionally, updating firmware helps the device remain compatible with the Video Management System (VMS), ensuring that it can work seamlessly with the latest software features and improvements. References: Axis Communications security and firmware update policies.

The field of view of a camera is determined by the focal length of the lens and the size of the sensor. The focal length affects how wide or narrow the view appears, while the sensor size impacts the overall field of view captured by the camera. Axis technical specifications detail how different combinations of focal length and sensor size influence the camera's field of view, allowing for precise control over what is captured in the frame.

"A longer focal length (such as 48 mm) results in a shorter depth of field compared to shorter focal lengths, meaning only a narrow range of distances will be in focus."

— Axis Communications Academy, Network Video Fundamentals, 2022

"Depth of field decreases as the focal length increases."

— Axis Lens Guide White Paper

Axis Sharpdome technology provides the advantage of enabling PTZ cameras to see above the horizon. This innovative design allows for 360-degree coverage and significantly enhances the field of view, making it possible to monitor areas both above and below the camera’s position without distortion. This feature is particularly beneficial for applications requiring extensive coverage and flexible monitoring angles. Axis Communications' product details on Sharpdome technology highlight this capability.

When recording a night scene with IR, using a day-and-night camera without an IR-corrected lens can cause the focus to shift. This happens because IR light and visible light have different wavelengths and refract differently through the lens. An IR-corrected lens is designed to handle both types of light without causing a focus shift, ensuring sharp images in both day and night conditions. References: Axis Communications product guides on day-and-night cameras and IR-corrected lenses.

A decoder allows for displaying digital live video on a monitor. Axis decoders convert digital video streams from network cameras into standard video signals that can be displayed on monitors. This is particularly useful in surveillance setups where live monitoring on standard displays is required. Axis offers various decoders designed for seamless integration with their camera systems, as detailed in their product documentation and solution guides.

On layer 3 of the OSI model, the protocol that enables network traffic is IP (Internet Protocol). IP is responsible for addressing and routing packets of data so that they can travel across networks and reach the correct destination. It provides logical addressing and handles the path through which data is transferred between source and destination nodes. Axis documentation confirms that IP is crucial for network communication and is fundamental for the operation of network video systems.

Session Initiation Protocol (SIP) is used to set up peer-to-remote calls, peer-to-peer calls, and SIP trunk calls. SIP is a signaling protocol widely used for initiating, maintaining, and terminating real-time communication sessions, including voice, video, and messaging applications. It facilitates communication between endpoints, whether they are directly connected or through a SIP trunk. Axis Communications' technical documentation on SIP and VoIP solutions confirms these uses.

A PoE switch with a power budget of 90 W can power 12 class 2 devices. Class 2 PoE devices typically require up to 7.5 W each. By dividing the total power budget (90 W) by the power requirement per device (7.5 W), we get 12 devices. This calculation aligns with the PoE standards defined in IEEE 802.3af/at, as outlined in Axis Communications' technical resources.

IEEE 802.1X is a network access control protocol that provides port-based authentication. It is used to secure wireless and wired networks by requiring devices to authenticate before gaining access to network resources. This protocol helps ensure that only authorized devices can connect to the network, enhancing security. References: Axis Communications product documentation on network security and port-based authentication.

Continuous recording ensures that no incidents are missed by capturing video footage continuously, without any gaps. This is crucial in security applications where it is important to have a complete record of events, enabling thorough investigations and evidence collection. Continuous recording ensures that every moment is documented, providing comprehensive coverage and peace of mind. References: Axis Communications guidelines on video recording and storage.

“Modular cameras (also called sensor units) are ideal for discreet and flexible installations in tight or unconventional spaces, such as ATMs, vending machines, and door intercoms, because the sensor and main unit can be separated and mounted independently.”

— Axis Communications Academy, Network Video Fundamentals, 2022

“Axis modular cameras are specifically designed for integration into machines, kiosks, and other compact environments where space is limited.”

— Axis Modular Cameras Product Overview

Video analytics applications detect movement perpendicular to the camera more easily than movement toward or away from the camera. This is because objects moving perpendicular to the camera create more significant changes in the pixel patterns, making it easier for the analytics software to detect and analyze the movement. Movement toward or away from the camera results in smaller changes in pixel patterns, which can be harder to detect accurately. References: Axis Communications documentation on video analytics and movement detection.

According to the inverse square law of light, the intensity of light is inversely proportional to the square of the distance from the source. If the light level is 100 lux at 70 meters, at half the distance (35 meters), the light level would increase by a factor of four (since (70/35)^2 = 2^2 = 4). Therefore, the light level at 35 meters would be 400 lux. This principle is widely recognized in lighting and photometric calculations and is supported by Axis documentation related to camera exposure and lighting conditions.

"If the IR-cut filter is stuck or not functioning properly, it can cause a color cast or unnatural tint in the image during daylight, similar to what is shown in the right image."

— Axis Communications Academy, Network Video Fundamentals, 2022

"A stuck IR-cut filter often causes an unnatural magenta or pinkish hue in daylight scenes."

— Axis Technical Note: IR-cut Filter Issues

AXIS Device Manager is the tool that enables easy upgrade of device firmware. It provides a comprehensive solution for managing multiple Axis devices, including firmware upgrades, configuration, and maintenance. AXIS Device Manager allows administrators to schedule and deploy firmware updates efficiently across multiple devices, ensuring that all devices are running the latest firmware with minimal downtime. This information is confirmed by Axis Communications' documentation on device management tools.

Axis Official Documentation Extract:

“A video decoder is a device that receives video streams from IP cameras over the network, decodes the streams, and outputs the video to a monitor, typically using HDMI or other standard video outputs. This allows users to view live network video on standard monitors or televisions without the need for a computer.”

— Source: AXIS Video Decoder Product Page

Supporting Extract from Axis Study Guide:

"Video decoders play a crucial role in network video systems where there is a need to display live video feeds on standard monitors. Unlike video encoders, which convert analog video to digital IP video streams, decoders convert IP video streams back into video signals that can be displayed on HDMI or composite video monitors."

— Axis Communications Academy, Network Video Fundamentals, 2022

Illumination is measured in lumens, which indicate the total amount of visible light emitted by a source. A light source with 10 watts and 4000 lumens emits more illumination than other options with lower lumens. Lumens are a direct measure of light output, so a higher lumen value corresponds to greater illumination. Axis product guides and technical references on lighting confirm that 4000 lumens provide the highest illumination among the given options.

The reason why the camera is not blinded by the headlights is that an IR-pass filter is in use. This filter blocks out visible light, including the bright headlights, and allows only infrared light to pass through. This is particularly useful in nighttime surveillance scenarios where the camera can rely on infrared illumination instead of visible light, ensuring clear visibility even in the presence of bright lights like headlights.

A smoked dome might negatively affect the image quality. Smoked domes can reduce the amount of light reaching the camera sensor, leading to darker and less clear images. While they offer additional privacy and reduce the visibility of the camera’s direction, they can compromise the overall image clarity and brightness. Axis Communications' documentation on dome camera housings and their impact on image quality confirms this.

If cameras are at risk of being exposed to a corrosive atmosphere, stainless steel housing should be used. Stainless steel provides excellent resistance to corrosion and is suitable for harsh environments where the camera might be exposed to chemicals, saltwater, or other corrosive substances. This ensures the longevity and reliability of the camera in such conditions. Axis Communications' documentation on camera housings and environmental considerations supports this recommendation.

"AXIS Live Privacy Shield enables real-time dynamic masking of objects such as faces and license plates in live and recorded video streams, helping with GDPR compliance."

— Axis Live Privacy Shield Product Page

"This analytics application can automatically mask or blur license plates and people in video streams."

— Axis Communications Academy, Network Video Fundamentals, 2022

Axis Official Documentation Extract:

“The unique design of the Sharpdome enables an innovative viewing experience, allowing the PTZ camera to see above its own horizon, giving more usable coverage, especially on uneven terrain or in hilly cities. This capability is called Axis Sharpdome technology.”

— Source: AXIS Q61 Series Sharpdome Technology

Supporting Extract from Axis Study Guide:

“Sharpdome technology allows PTZ cameras to deliver sharp images in all directions, and for the first time, the camera can view above the horizon, which is not possible with conventional dome cameras.”

— Axis Communications Academy, Network Video Fundamentals, 2022

The AXIS V5938 is a professional video broadcasting camera designed specifically for high-quality video streaming and broadcasting applications. It offers features such as 4K Ultra HD resolution, powerful zoom capabilities, and advanced image processing, making it ideal for live broadcasts, webcasting, and other professional video applications. Axis documentation highlights the V5938 as a top choice for video broadcast due to its superior image quality and streaming capabilities.

The maximum distance from a midspan to a camera requiring PoE+ (25.5 W) is 100 meters (328 feet). This distance limitation is due to the standard Ethernet cable length limit, ensuring effective power delivery and data transmission over the network.

In good conditions, a pixel density of 250 px/m (80 px/ft) is required for identification purposes. This means that at this resolution, the image quality is sufficient to identify individuals, objects, or other details accurately. Identification requires the highest level of detail among the common surveillance objectives (detection, observation, recognition, identification). This pixel density allows for clear and precise visual information necessary for identifying specific features such as facial characteristics or license plates.

"An IR-corrected lens is designed to keep the image in focus for both visible and infrared light, ensuring the camera stays in focus when switching from day (color) mode to night (IR) mode."

— Axis Communications Academy, Network Video Fundamentals, 2022

"IR-corrected lenses prevent focus shift when the camera switches between visible and infrared illumination."

— Axis Lens Accessories Guide

"For reliable identification of a person’s face, Axis recommends a pixel density of at least 250 pixels per meter (80 pixels per foot) on the target area."

— Axis Communications, Design Tool: Pixel Density Recommendations

"Identification: 250 px/m – Needed to identify a person beyond reasonable doubt."

— Axis Communications Academy, Network Video Fundamentals, 2022

To calculate the storage required to record one hour of video from two cameras streaming at 6 Mbit/s each, we use the following steps:

Total bitrate for both cameras: 6 Mbit/s×2=12 Mbit/s6 \text{ Mbit/s} \times 2 = 12 \text{ Mbit/s}6 Mbit/s×2=12 Mbit/s

Convert Mbit/s to Mbyte/s: 12 Mbit/s÷8=1.5 Mbyte/s12 \text{ Mbit/s} \div 8 = 1.5 \text{ Mbyte/s}12 Mbit/s÷8=1.5 Mbyte/s

Calculate the total data for one hour: 1.5 Mbyte/s×3600 seconds=5400 Mbytes1.5 \text{ Mbyte/s} \times 3600 \text{ seconds} = 5400 \text{ Mbytes}1.5 Mbyte/s×3600 seconds=5400 Mbytes

Convert Mbytes to Gbytes: 5400 Mbytes÷1024=5.27 Gbytes5400 \text{ Mbytes} \div 1024 = 5.27 \text{ Gbytes}5400 Mbytes÷1024=5.27 Gbytes

Approximately, the storage required is 5.4 GB.

"Box cameras are known for their straightforward form factor, making it easy to determine exactly where the camera is pointing and where potential blind spots may be."

— Axis Communications Academy, Network Video Fundamentals, 2022

"Box cameras do not have built-in vandal-resistant housings by default, and lenses are interchangeable."

— Axis Box Cameras Overview

Secure boot is a security feature that ensures only authenticated and untampered firmware can run on Axis devices. During the start-up process, secure boot checks the digital signature of the firmware against a trusted certificate. If the firmware has been tampered with or is not authenticated, the device will block and reject it, preventing potential security breaches. This mechanism is part of Axis' commitment to cybersecurity and is detailed in their security white papers and firmware documentation.

An explosion-protected camera is specifically designed to contain any internal explosion within its housing. This type of camera is built to operate in hazardous environments where flammable gases or dust may be present. The robust housing prevents the internal explosion from igniting the surrou

nding atmosphere, thereby ensuring safety. Axis Communications offers explosion-protected cameras that adhere to stringent safety standards to prevent ignition and ensure reliable operation in dangerous conditions, as detailed in their product specifications.

Accelerometers are used in Axis cameras primarily for shock detection. They detect sudden movements or impacts that might indicate tampering or vandalism. When a shock is detected, the camera can trigger alerts or initiate protective actions to safeguard the device and maintain surveillance integrity. Axis technical specifications detail the use of accelerometers in various models for enhanced security through shock detection.

OptimizedIR technology in Axis cameras adjusts the IR illumination to match the camera's field of view. This ensures that the IR light is evenly distributed across the scene, reducing the risk of overexposure and enhancing image quality. Furthermore, this alignment helps to maintain image clarity and detail by preventing hot spots and ensuring a balanced exposure across the entire frame. According to Axis documentation, these benefits help improve the effectiveness of night-time surveillance and reduce the need for additional external IR illuminators.

Lightfinder is a technology developed by Axis that allows cameras to maintain color images even in very low light conditions. In dark scenes, Lightfinder automatically adjusts the exposure when an object approaches, enhancing visibility and detail. This feature is particularly useful for capturing clear images in challenging lighting environments without requiring additional lighting. References: Axis Communications product specifications and technical descriptions of Lightfinder technology.

A video encoder effectively turns an analog camera into a network camera by converting the analog signal to a digital format, which can then be transmitted over a network. Additionally, video encoders add intelligent functionality found in network cameras, such as motion detection, event management, and video analytics capabilities. These features enable legacy analog systems to integrate with modern IP-based surveillance solutions. References: Axis Communications product documentation on video encoders.

"Lossy compression algorithms such as H.264 and H.265 achieve greater bitrate reduction by discarding some image information, which is not recoverable. This enables efficient transmission and storage while maintaining acceptable image quality."

— Axis Communications Academy, Network Video Fundamentals, 2022

"Lossy compression reduces the file size significantly by removing information that is not needed for human viewing. The removed content cannot be restored."

— Axis Web Article: Video Compression

Using PoE (Power over Ethernet) to power cameras helps keep them running during a power outage because PoE cameras are centrally powered from the Ethernet switches, which are often backed up by an uninterrupted power supply (UPS). This means that in the event of a power failure, the UPS can provide temporary power to the switches and, consequently, to the connected PoE cameras, ensuring continuous operation.

Axis thermal cameras are designed to detect activity in both daylight and complete darkness by capturing the heat emitted by objects and people. Unlike traditional cameras that rely on visible light, thermal cameras are effective in various lighting conditions, including complete darkness, fog, smoke, and even camouflaged objects. This makes them suitable for perimeter protection and monitoring in challenging environments. [Reference: Axis Communications - Thermal Cameras]

A zoom lens maintains focus when changing field of view, whereas a varifocal lens does not necessarily maintain focus when changing the focal length. This means that with a zoom lens, you can zoom in or out and the focus will remain sharp, which is particularly useful for applications requiring continuous focus adjustments. In contrast, varifocal lenses need to be refocused after adjusting the focal length. This distinction is important in video surveillance to ensure clear image capture at varying distances.

When a camera is zoomed out, the field of view increases, causing each object or movement to cover fewer pixels. As a result, more pixels need to change to trigger motion detection. This means the motion detection sensitivity may be reduced unless adjustments are made to the detection settings. For more information, refer to Axis Communications' motion detection setup guides.

Focusing a camera improves image clarity and detail but also increases the bandwidth. This happens because a sharper image contains more detailed information, requiring more data to transmit over the network. Hence, the bandwidth usage increases as the camera focuses more accurately.

Axis P-iris technology is designed to optimize the iris position for optimal depth of field, resolution, and image contrast. It also helps in managing challenging lighting conditions such as backlighting by controlling the amount of light reaching the image sensor. This allows the camera to produce clear images even when facing direct sunlight or other bright light sources.

The maximum distance for a 100BaseTX Ethernet carrying 802.3at PoE connection between a switch and a camera without any extenders or repeaters is 100 meters (328 feet). This standard distance is applicable for most Ethernet networks and ensures reliable power and data transmission over the specified length.

To ensure that 20 cameras show the same synchronized date and time in Live View, the best method is to synchronize the date and time with a remote NTP (Network Time Protocol) server. NTP servers are designed to synchronize clocks of network devices, ensuring accurate and consistent timekeeping across all connected devices. This method is reliable and commonly used in networked environments to maintain time synchronization across multiple devices.

The ONVIF (Open Network Video Interface Forum) standard provides several benefits to end users. One key benefit is that it helps create future-proof systems and more secure investments by ensuring interoperability between different manufacturers' devices, which protects against obsolescence. Additionally, ONVIF increases flexibility and offers greater freedom of choice, allowing users to mix and match devices from different vendors, thereby tailoring their security systems to specific needs without being locked into a single manufacturer's ecosystem.

Fluorescent lighting can cause flickering effects in video due to the way these lights operate. Fluorescent lamps typically flicker at twice the power line frequency (50 Hz or 60 Hz), which can interfere with the camera's frame rate and shutter speed, leading to visible flickering in the recorded video. This effect is more pronounced when the camera's exposure settings are not synchronized with the frequency of the lighting. Axis Network Video documentation discusses the importance of using cameras with anti-flicker settings or adjusting the shutter speed to match the lighting frequency to mitigate this issue.

The feature in Axis cameras that allows a fixed box style camera to tell a PTZ camera to move to a preset is the HTTP server. Axis cameras can use HTTP commands to communicate with each other over the network. By sending an HTTP request from a fixed camera, the PTZ camera can be directed to move to a specific preset position, enabling coordinated surveillance coverage.

In a switched network with Unicast, data packets are sent from the source to a single specific recipient. No other computers on the network will receive the data intended for that recipient. This method ensures that the communication is direct and private between the sender and the receiver, which helps in managing network bandwidth efficiently. [Reference: Axis Communications - Networking Basics for IP Surveillance]

When choosing between a camera with good low light performance and a thermal camera, the specific conditions of the installation site are crucial. For scenarios such as:

A. A primarily dark area like a subway or parking garage, a camera with good low light performance is necessary to capture detailed images in low light conditions where visible light is minimal.

C. In a parking lot for facial identification, good low light performance is essential to ensure that the camera can capture clear and recognizable facial features, even in low light situations.

Thermal cameras, while effective in detecting heat signatures, are not suitable for capturing detailed visual information such as facial identification.

The AXIS M3114-R is designed specifically for use in environments with vibrations, such as transportation. It is rugged and can withstand shocks and vibrations inherent in mobile applications. Other models like the AXIS P3344-VE, AXIS M3014, and AXIS P1344 do not have the same level of vibration resistance. Detailed specifications and use cases for the AXIS M3114-R can be found in the Axis Communications product catalog and datasheets.

The P-iris (Precise Iris Control) technology in Axis cameras ensures optimal image quality by precisely controlling the iris position. In bright lighting conditions, P-iris prevents the iris from closing too much, which can cause blurring due to diffraction. Instead, it maintains an optimal iris opening to balance depth of field and image sharpness. For more information, consult Axis Communications' technical notes on P-iris technology.

A privacy mask in Live View is used to hide parts of the scene from being viewed or recorded, ensuring privacy in specific areas of the surveillance footage. These masks can be configured in various shapes to cover the required sections effectively. Privacy masks are particularly useful in environments where certain areas need to be excluded from monitoring to comply with privacy laws and regulations. [Reference: Axis Communications - Privacy Masking Features]

Top of Form

Bottom of Form

When installing a network camera with PoE, the following best practices should be considered:

C. The correct PoE standards are being used. This ensures compatibility between the camera and the PoE switch or injector, preventing power issues.

E. The correct cabling standards are being used. Category 5e or higher cabling is recommended to ensure reliable power delivery and data transmission over PoE.

Following these practices helps in achieving a stable and efficient PoE camera installation.

Axis P-iris technology is designed to optimize the camera's aperture to achieve better image quality. By precisely controlling the iris opening, P-iris technology can maintain the ideal aperture size for various lighting conditions. This helps limit optical artifacts such as diffraction and spherical aberration, ensuring sharp and clear images. While it can contribute to improved low light performance and reduce motion blur, its main advantage is optimizing the aperture to limit artifacts. Axis Network Video documentation explains that P-iris provides more precise iris control compared to traditional DC-iris, leading to enhanced image quality.

Ghost image occurs when the shutter time is too long. Long shutter times can cause moving objects to appear blurry or leave a "ghost" trail in the image, as the sensor is exposed to the scene for an extended period, capturing multiple positions of a moving object within a single frame.

When dealing with a poorly lit scene, adding light is the most effective option to improve image quality. Proper illumination ensures that the camera's sensor can capture clear and detailed images, reducing noise and enhancing visibility. While adjusting exposure settings, brightness, or changing camera placement can help, they are secondary to the fundamental requirement of adequate lighting.

To reduce the impact on recorded video during server maintenance, Video Management Software (VMS) partners can incorporate local storage at the camera. This feature allows the camera to continue recording video on its internal storage (such as an SD card) during network or server downtime, ensuring continuous video capture. Once the server is back online, the recorded footage can be transferred back to the central storage. Axis cameras support local storage options, which are detailed in Axis Communications' product documentation and VMS integration guides.

Top of Form

Bottom of Form

Increased noise levels in a scene typically result in higher bandwidth usage. Noise introduces additional variations in the video signal, which the compression algorithm must encode, leading to increased data rates. This is particularly noticeable in low-light conditions where electronic noise can significantly impact the video stream. Axis Network Video documentation explains that noise reduction techniques and proper lighting can help manage and reduce the bandwidth impact caused by increased noise levels in surveillance video.

Top of Form

Bottom of Form

The Axis pixel counter is a tool that allows users to verify that the camera's resolution meets the requirements for a specific scene. This is particularly useful in ensuring that critical areas are captured with sufficient detail for identification and analysis. The pixel counter helps in confirming that the pixel density is adequate for the intended surveillance purposes. Detailed explanations can be found in Axis Communications' camera setup and configuration documentation.

VAPIX® is an open API from Axis Communications that allows for the integration of Axis products with other system components. This openness facilitates the development of customized applications and solutions, making it easier for integrators to incorporate Axis products into broader security and surveillance systems, ensuring compatibility and flexibility. [Reference: Axis Communications - VAPIX API Documentation]

Top of Form

Bottom of Form

To identify people with 80 pixels per face in a hallway that is 2.5 meters wide, a minimum resolution of 1280x720 (720p) is needed. This resolution ensures sufficient pixel density to capture detailed facial features necessary for identification purposes. Given the width of the hallway and the required pixel density, 720p provides the necessary coverage and detail.

The ONVIF (Open Network Video Interface Forum) standard provides several benefits to end users. One key benefit is that it helps create future-proof systems and more secure investments by ensuring interoperability between different manufacturers' devices, which protects against obsolescence. Additionally, ONVIF increases flexibility and offers greater freedom of choice, allowing users to mix and match devices from different vendors, thereby tailoring their security systems to specific needs without being locked into a single manufacturer's ecosystem.

To achieve four H.264 streams at 30 fps from the same camera product that can deliver two full resolution 30 fps H.264 streams, the resolution of the streams must be decreased. By lowering the resolution, the camera reduces the amount of data processed and transmitted for each stream, making it possible to support additional streams. Axis Network Video documentation indicates that stream configuration, including resolution and frame rate adjustments, allows cameras to manage multiple streams effectively while maintaining performance.

For the best accuracy in a people counting application, the camera should be mounted directly above the entrance. This overhead position provides a clear view of the individuals entering and ensures accurate counting by minimizing obstructions and capturing each person as they cross the threshold. Axis’s guidelines for people counting applications recommend this mounting position to achieve the highest accuracy and reliability in the data collected.

To improve the overall quality of the image:

A. Decrease image compression setting: Lowering the compression setting will reduce artifacts and improve image clarity by preserving more of the original data in each frame. E. Change to a camera with higher resolution: Using a camera with higher resolution will capture more detail and improve the clarity of the enlarged image.

These adjustments ensure better image quality by enhancing the detail and reducing compression artifacts.

Existing coaxial cables can be repurposed for use with network cameras through the use of media converters. These devices convert the analog signals transmitted over coaxial cables into digital signals that can be used by network cameras, allowing for the continued use of existing cabling infrastructure. This approach can be cost-effective and less disruptive compared to installing new network cables. Axis Network Video documentation provides detailed guidance on the use of media converters to leverage existing coaxial cabling for network camera installations.

When changes made to image clarity within the camera web interface are not reflected within a Video Management Software (VMS), it is often due to the VMS having its settings and configurations that can overwrite those made directly on the camera. Many VMS solutions are designed to manage and standardize settings across multiple cameras, ensuring consistency in video quality and performance. This functionality can override local changes made on the camera interface. According to Axis Network Video documentation, this behavior is typical in integrated systems where VMS settings take precedence to maintain uniformity across all connected devices.

To utilize IEEE 802.1X for connecting a camera to the network, the following are required:

A. An Ethernet switch with support for IEEE 802.1X, which ensures that only authorized devices can connect to the network.

C. A RADIUS server, which is used to manage authentication, authorization, and accounting (AAA) for network access control.

These components are essential for setting up secure network access using IEEE 802.1X.

A DNS (Domain Name System) server translates human-readable domain names (like www.axis.com ) into IP addresses that computers use to identify each other on the network. This process is essential for accessing websites and other resources on the Internet using user-friendly domain names instead of numerical IP addresses. [Reference: Axis Communications - Networking Basics]

The Arctic Temperature Control functionality in Axis cameras is designed to protect the camera electronics by ensuring the device can operate in extremely cold temperatures. This feature helps maintain the internal temperature of the camera, preventing the electronics from freezing and ensuring reliable performance in harsh environments. Detailed information on Arctic Temperature Control can be found in Axis Communications product specifications and user manuals.

The IP51 and IP52 ratings indicate that the camera is protected against dust and dripping water. IP51 means the camera is protected against dust ingress to a level that would interfere with the operation and against vertically dripping water. IP52 offers the same dust protection but also protects against dripping water when tilted up to 15 degrees. These ratings make the cameras suitable for indoor use where dust and minor water exposure might occur. Axis Network Video documentation specifies the IP rating system and the levels of protection provided by different ratings.

When a camera's image appears "washed out" or faded, especially in a hallway with no windows, the first setting to adjust is the exposure settings. Proper exposure settings ensure that the camera captures the right amount of light, enhancing image quality and color accuracy. Adjusting settings such as the shutter speed, iris, and gain can help improve the overall image contrast and color fidelity. [Reference: Axis Communications - Image Quality Settings and Adjustments]

The AXIS M3204 is a cost-effective mini dome camera with a varifocal lens. It does not include DC-iris or audio capabilities, making it suitable for the specified requirements. The other options either include additional features that are not needed or do not meet the cost-effectiveness criteria. For detailed product specifications, refer to Axis Communications' datasheets and product catalogs.

The Guard Tour function allows a PTZ camera to automatically move between predefined positions at set intervals. This feature is particularly useful for monitoring multiple areas with a single camera. By configuring a Guard Tour, the camera can sequentially switch between different positions, providing comprehensive coverage without manual intervention. [Reference: Axis Communications - PTZ Camera Configuration]

When setting up PTZ control for an Axis encoder, after connecting the communication wires, it is crucial to set the Baud Rate to match the analog PTZ's. This step ensures proper communication between the encoder and the PTZ camera. The Baud Rate must align with the camera's communication settings to function correctly. For more detailed setup instructions, refer to the Axis Communications installation guides and user manuals for PTZ configuration.

IP subnets and VLANs are commonly used network features to prevent unauthorized access to the surveillance network. By segmenting the network using IP subnets, different portions of the network can be isolated, reducing the risk of cross-network attacks. VLANs (Virtual Local Area Networks) further enhance security by creating separate broadcast domains within the same physical network, thereby isolating surveillance devices from other network traffic and improving overall network security and performance.

ONVIF (Open Network Video Interface Forum) is the API used to ensure interoperability between products from different vendors. ONVIF provides standardized interfaces for effective interoperability among IP-based physical security products, enabling devices like cameras, video management systems, and access control systems from different manufacturers to work together seamlessly.

Gatekeeper is a feature in Axis PTZ cameras that allows the camera to automatically zoom in on an object when motion is detected within a predefined area. This function is useful for focusing on areas of interest, such as entry points or sensitive zones, enhancing security monitoring by providing detailed views of potential security events. Axis Network Video documentation explains that Gatekeeper uses video motion detection to trigger the zoom function, ensuring that important details are captured without manual intervention.

Exposure time can become a limiting factor for the camera in delivering full frame rate. Longer exposure times allow more light to hit the camera sensor, improving image quality in low light conditions but also reducing the number of frames per second (fps) that the camera can capture. Shorter exposure times allow higher frame rates but may result in underexposed images in low light conditions.

Operating cameras above their specified temperature limits can increase noise in the captured images. High temperatures can affect the electronic components of the camera, leading to higher thermal noise and degraded image quality. Ensuring cameras operate within their designated temperature ranges is critical for maintaining image clarity and overall performance. Refer to Axis Communications' product specifications and environmental guidelines for more information.

Before upgrading the firmware, it is essential to verify that the Video Management Software (VMS) supports the latest firmware version. Incompatibility between the VMS and the new firmware can lead to operational issues and reduced functionality. Checking for VMS support ensures a smooth upgrade process. This recommendation can be found in Axis Communications' firmware upgrade guidelines and best practices.

In an Ethernet network, broadcast traffic is sent to all devices within the network segment. This means every device receives and processes the broadcast packets, which can lead to high network load and congestion, making it inefficient for applications like network video where large amounts of data need to be transmitted reliably and efficiently. Axis documentation advises against relying on broadcast traffic for video streams, as it can degrade network performance and the quality of the video feed due to the excessive load on the network.

The most noticeable difference between progressive scan and interlaced video is apparent when viewing frame-by-frame recorded video of moving vehicles. Progressive scan captures and displays all lines of each frame in sequence, resulting in smoother and clearer images, especially for fast-moving subjects. In contrast, interlaced video captures and displays alternate lines per frame, which can cause motion artifacts and blurring in fast-moving scenes. Axis Network Video documentation highlights that progressive scan is preferred for applications where clarity and detail in moving objects are critical.