Weekend Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70percent

Certensure Logo
  1. Home
  2. Fortinet
  3. Fortinet Certified Solution Specialist
  4. FCSS_NST_SE-7.4 - FCSS - Network Security 7.4 Support Engineer

Fortinet FCSS_NST_SE-7.4 FCSS - Network Security 7.4 Support Engineer Exam Practice Test

Demo: 19 questions
Total 66 questions
Get FCSS_NST_SE-7.4 Full Access Download FCSS_NST_SE-7.4 PDF

FCSS - Network Security 7.4 Support Engineer Questions and Answers

Question 1

Which two statements about conserve mode are true? (Choose two.)

Options:

A.

FortiGate enters conserve mode when the system memory reaches the configured extreme threshold.

B.

FortiGate starts taking the configured action for new sessions requiring content inspection when the system memory reaches the configured red threshold.

C.

FortiGate exits conserve mode when the system memory goes below the configured green threshold.

D.

FortiGate starts dropping all new sessions when the system memory reaches the configured red threshold.

Question 2

Refer to the exhibit, which shows the omitted output of a session table entry.

Which two statements are true? (Choose two.)

Options:

A.

The traffic has been tagged for VLAN 0000.

B.

NP7 is handling offloading of this session.

C.

The traffic matches Policy ID 1.

D.

The session has been offloaded.

Question 3

Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.

What two conclusions can you draw Itom the output? (Choose two.)

Options:

A.

The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.

B.

The logon event can be seen on the collector agent installed on Windows.

C.

FSSO is using DC agent mode to detect logon events.

D.

FSSO is using agentless polling mode to detect logon events.

Question 4

Refer to the exhibit, which contains partial output from an IKE real-time debug.

The administrator does not have access to the remote gateway.

Based on the debug output, which configuration change the administrator make to the local gateway to resolve the phase 1 negotiation error?

Options:

A.

In the phase 1 proposal configuration, add AES256-SHA256 to the list of encryption algorithms.

B.

In the phase 1 proposal configuration, add AESCBC-SHA2 to the list of encryption algorithms.

C.

In the phase 1 network configuration, set the IKE version to 2.

D.

In the phase 1 proposal configuration, add AES128-SHA128 to the list of encryption algorithms.

Question 5

Refer to the exhibit, which shows the output of the command get router info ospf neighbor.

To what extent does FortiGate operate when looking at its OSPF neighbors? (Choose two.)

Options:

A.

The local FortiGate has at least one interface that participates in a broadcast network.

B.

The local FortiGate has at least one interface that participates in a point-to-point network.

C.

The local FortiGate is the DR.

D.

Neighbor 0.0.0.18 is the designated router (DR).

Question 6

Refer to the exhibit, which shows a partial output of a real-time LDAP debug.

What two conclusions can you draw from the output? (Choose two.)

Options:

A.

The user was found in the LDAP tree, whose root is TAC.ottawa.fortinet.com.

B.

FortiOS performs a bind to the LDAP server using the user's credentials.

C.

FortiOS collects the user group information.

D.

FortiOS is performing the second step (Search Request) in the LDAP authentication process.

Question 7

What are two functions of automation stitches? (Choose two.)

Options:

A.

You can configure automation stitches on any FortiGate device in a Security Fabric environment.

B.

You can configure automation stitches to execute actions sequentially by taking parameters from previous actions as input for the current action.

C.

You can set an automation stitch configured to execute actions in parallel to insert a specific delay between actions.

D.

You can create automation stitches to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.

Question 8

Refer to the exhibit, which shows the output of get router info ospf neighbor.

What can you conclude from the command output?

Options:

A.

The network type connecting the local Fortigate and OSPF neighbor 0.0.0.10 is point-to-point.

B.

All neighbors are in area 0.0.0.0.

C.

The local FortiGate is the BDR.

D.

The local FortiGate is not a DROther.

Question 9

Exhibit.

Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.

Which two statements about the output are true? (Choose two.)

Options:

A.

There are 98908 kB o! memory that will never be used.

B.

The user space has 708880 kB of physical memory that is not used by the system.

C.

The I/O cache, which has 641364 kB of memory allocated to it.

D.

The value indicated next to the inactive heading represents the currently unused cache page.

Question 10

Refer to the exhibit, which shows partial outputs from two routing debug commands.

Which change must an administrator make on FortiGate to route web traffic from internal users to the internet, using ECMP?

Options:

A.

Set snat-route-change to enable.

B.

Set the priority of the static default route using port2 to 1.

C.

Set preserve-session-route to enable.

D.

Set the priority of the static default route using port1 to 10.

Question 11

Refer to the exhibit, which shows one way communication of the downstream FortiGate with the upstream FortiGate within a Security Fabric.

What three actions must you take to ensure successful communication? (Choose three.)

Options:

A.

You must authorize the downstream FortiGate on the root FortiGate.

B.

FortiGate must not be in NAT mode.

C.

Ensure TCP port 8013 is not blocked along the way.

D.

You must enable Security Fabric/Fortitelemetry on the receiving interface of the upstream FortiGate.

E.

Ensure the port for Neighbor Discovery has been changed.

Question 12

Refer to the exhibit, which shows the output o! the BGP database.

Which two statements are correct? (Choose two.)

Options:

A.

The advertised prefix of 10.20.30.0'24 was configured using the network command.

B.

The first four prefixes are being advertised using a legacy route advertisement.

C.

The advertised prefix of 10.20.30.0'24 is being advertised through the redistribution of another routing protocol.

D.

The output shows all prefixes advertised by all neighbors as well as the local router.

Question 13

Refer to the exhibit, which shows the partial output of FortiOS kernel slabs.

Which statement is true?

Options:

A.

The total slab size of the sctp_session slab is 0 kB and is associated with the user space.

B.

The total slab size of the ip_session slab is 3600 kB and is associated with the user space.

C.

The total slab size of the ip6_session slab is 1300 kB and is associated with the kernel.

D.

The total slab size of the tcp_session slab is 7500 kB and is associated with the kernel.

Question 14

Which statement about parallel path processing is correct (PPP)?

Options:

A.

PPP chooses from a group of parallel options lo identity the optimal path tor processing a packet.

B.

Only FortiGate hardware configurations affect the path that a packet takes.

C.

PPP does not apply to packets that are part of an already established session.

D.

Software configuration has no impact on PPP.

Question 15

Refer to the exhibit.

Assuming a default configuration, which three statements are true? (Choose three.)

Options:

A.

Strict RPF is enabled by default.

B.

User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.

C.

User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.

D.

User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.

E.

User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.

Question 16

Refer to the exhibit, which shows a truncated output of a real-time LDAP debug.

What two conclusions can you draw from the output? (Choose two.)

Options:

A.

The name of the configured LDAP server is Lab.

B.

The user is authenticating using CN=John Smith.

C.

FortiOS is able to locate the user in step 3 (Bind Request) of the LDAP authentication process.

D.

FortiOS is performing the second step (Search Request) in the LDAP authentication process.

Question 17

Refer to the exhibit showing a debug output.

An administrator deployed FSSO in DC Agent Mode but FSSO is failing on FortiGate. Pinging FortiGate from where the collector agent is deployed is successful.

The administrator then produces the debug output shown in the exhibit.

What could be causing this error message?

Options:

A.

The TCP port 445 is blocked between FortiGate and collector agent.

B.

The collector agent preshared password is mismatched.

C.

The FortiGate cannot resolve the active directory server name.

D.

The FortiGate and the collector agent are using different TCP ports.

Question 18

Exhibit.

Refer to the exhibit, which shows the output of a session. Which two statements are true? (Choose Iwo.)

Options:

A.

The TCP session has been successfully established.

B.

The session was initiated from an authenticated user.

C.

The session is being inspected using flow inspection.

D.

The session is being offloaded.

Question 19

Refer to the exhibit, which shows the output of a debug command.

Which two statements about the output are true? (Choose two.)

Options:

A.

The interlace is part of the OSPF backbone area.

B.

There are a total of five OSPF routers attached to the vorz4 network segment

C.

One of the neighbors has a router ID of 0.0.0.4.

D.

In the network connected to port4, two OSPF routers are down.

Load More FCSS_NST_SE-7.4 Questions
Demo: 19 questions
Total 66 questions
Get FCSS_NST_SE-7.4 Full Access Download FCSS_NST_SE-7.4 PDF