Weekend Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70percent

Huawei H13-629_V2.5 HCIE-Storage (Written) v2.5 Exam Practice Test

Demo: 51 questions
Total 343 questions

HCIE-Storage (Written) v2.5 Questions and Answers

Question 1

A company’s daily real-time online transaction data is about 500G and 30G daily new data, the new data is frequently called within a week after the production.

The company employees 80 people, each person's mailbox space is 5G, and the average space utilization rate is 60%. For a six months demand, A company should configure which of the following?

Options:

A.

High-performance layer 550G, performance layer 250G; capacity layer 6T

B.

High-performance layer 400G, performance layer 250G; capacity layer 7T

C.

High-performance layer 800G, performance layer 400G; capacity layer 6T

D.

high-performance layer 600G, performance layer 300G; capacity layer 7T

Question 2

When the data migration solution based on remote replication is used, services must be suspended at least once.

Options:

A.

TRUE

B.

FALSE

Question 3

Customers purchased 3 RH228H v2 hosts (with LPE12002-AP_8G HBA with 2 FC ports), 2 Oceanstor VIS6600T (a total of eight four-port 8G FC interface card, two 4-port 1GE interface card, two 8-port 1GE switch module), two Huawei OCeanStor S6800T, and 2 Brocade 300 switches to build VIS6600T 4-node cluster and pass two S6800Ts.

The VIS600T cluster is mirrored. Each of the three hosts needs a standard dual-switch redundancy network connected to the VIS6600T4 node. Each Brocade 300 Fiber Channel switches need to use which number of FC ports?

Options:

A.

15

B.

19

C.

21

D.

17

Question 4

Zone change on a FC switch will send the switch to send RSCN to the device in a Zone. Which fabric service is responsible for collecting the status of the fabric change information?

Options:

A.

Fabric Server

B.

Fabric Controller server

C.

Name Server

D.

Management Server

Question 5

Using Simpana to achieve a complete Exchange backup requires at least which of the following components? (Multiple choice)

Options:

A.

offline mining

B.

database

C.

mailbox

D.

public folder

Question 6

A customer RAID 5 fails in the OceanStor v3 storage array. After the engineer reclaims the RAID group to the degraded state through commands, the RAID group tries to rebuild, but reconstruction failed many times, which of the following is correct (multiple choice).

Options:

A.

Recovery of the RAID group can be done by recovering the first failed hard disk

B.

Recovery of the RAID group can not be done by recovering the first failed hard disk

C.

Recovery of the Raid group by recovering the first failed hard disk, the recovered data will be lost for a period of time

D.

Recovering the Raid Group by Recovering the First Erased Hard Disk, the recovered data is not available

Question 7

Which of the following describes the correct steps of an Oracle database backup?

1, backup oralce control file

2, backup oracle archive log

3, oralce placed in backup mode

4, oracle placed in normal mode

5, backup oracle data files

Options:

A.

3,5,2,1,4

B.

3,1,5,4,2

C.

3,5,2,4,1

D.

3,5,1,2,4

Question 8

Which of the following commands will test the heartbeat disk connectivity?

Options:

A.

Run / usr / bin / readvgcla-V dhbvg -F status on node A and run / usr / bin / putvgda_V dhbvg -a on node B.status = 1

B.

Run / usr / sbin / rsct / bin / dhb_transmit hdisk8 on Node A and run / usr / sbin / rsct / bin / dhb_receive on Node Bhdisk8

C.

Run / usr / sbin / rsct / bin / dhb_read-p hdisk8 -r on node A, / usr / sbin / rsct / bin / dhb_read-p hdisk8 -t

D.

Run echo 1 | / usr / bin / dd of = / dev / rhdisk10 bs = 4k skip = 2 count = 1 on Node A and run on Node Bcommand / usr / bin / dd if = / dev / rhdisk10 bs = 4k skip = 2 count = 1

Question 9

For the configuration of the management network port and service network port of the VTL engine in the VTL6900 system, the following description is incorrect

Options:

A.

The first time you configure and use eth1, you can directly configure the network port IP on the VTL console

B.

In the command line configuration management network port directory / etc / sysconfig / network-scripts

C.

In the command line configuration, you need to log in to the VTL operating system, the user name is root

D.

After the command line configuration is complete, you need to restart the network service by running the service network restart command

Question 10

A computer center plans to purchase a set of Huawei Oceanstor 9000 products as a follow-up storage system. The requirements are as follows:

(1) The minimum storage system needs to provide a total bandwidth of 3-4GB / s

(2) storage space can reach 1PB, to meet a single file GB storage

(3) computer center room requires control deployed in a cabinet use

(4) Internal computer cluster nodes are now all InfiniBand network

Based on the above information, which of the following configuration suggestions do you think is more suitable for this project?

Options:

A.

Because computing tasks are designed for large file services, it is more appropriate to deploy with an 8-node OceanStor 9000 C node. The capacity on the use of 4TB SATA, to meet customer needs

B.

Using Oceanstor 9000 C Node combined with the total bandwidth and total capacity requirements, consider the 8-node configuration 4TB SATA full disk, backend 10GETOE + front-end IB networking

C.

From the reliability point of view, it is recommended to use the InfoEqualizer function to access the OceanStor 9000 storage through a domain name. The InfoEqualizer DNS segment needs to be considered and OceanStor 9000 back-end to interoperability

D.

OceanStor 9000 supports front-end 10GE TOE + back-end IB networking, the front-end is easy to log in and manage with the management PC interworking, considering this networking solution can reduce the cost of front-end IB switches.

Question 11

Which of the following statement regarding the Huawei disaster recovery solution on the implementation of disaster recovery exercise is wrong?

Options:

A.

The disaster recovery walkthrough automatically stops the production application and unproduces the production to production host mapping on the deviceManager

B.

The application of disaster recovery drill is mainly about the production system to switch to disaster recovery operation, exercise disaster recovery environment is correct

C.

After the disaster recovery drills are executed, the replication relationship will be split, and the disaster recovery end will take over the production system running service

D.

The Drill process can be normal in the production side to stop the business, a quick move to a disaster recovery operation

Question 12

Enable SmartMigration on OceanStor V3 and start a migration task with SmartMigration. Before migration, suppose the LUN ID and the data volume ID of the source LUN are 1 and 2 respectively while the LUN ID and the data volume ID of the destination LUN are 3 and 4 respectively, what are they after migration?

Options:

A.

Source LUN: 1 and 3Destination LUN: 2 and 4

B.

Source LUN: 1 and 4Destination LUN: 3 and 2

C.

Source LUN: 3 and 1Destination LUN: 4 and 2

D.

Source LUN: 2 and 4Destination LUN: 1 and 3

Question 13

When using OceanStor V3, you need to mount the file system snapshot to access the snapshot data.

Options:

A.

True

B.

False

Question 14

For Oracle database to do online RMAN physical backups, you need oracle to run in _____ mode; To restore data files, you need to start the Oracle____(Fill in the blanks multiple choice)

Options:

A.

Non-archiving

B.

Archiving

C.

nomount

D.

mount

Question 15

A physical standby database is kept synchronized with the primary database, through Redo Apply, which recovers the redo data received from the primary database and applies the redo to the physical standby database. Which of the following disaster recovery technologies is working as the above statement?

Options:

A.

LogReplecation

B.

DataGuard

C.

GoldenGate

D.

VVR

Question 16

An enterprise has purchased two sets of HUAWEI OceanStor 9000 devices. To ensure the security of the data, one set provides storage for the production site and the other set is on the disaster recovery site to provide data redundancy. If the two Huawei Oceanstor 9000 storage system are to establish remote replication, which of the following is wrong?

Options:

A.

Recovery strategy supports both manual and automatic methods

B.

synchronization rates are high, medium and low third gear

C.

The type of synchronization is manual, the timing is started after the synchronization starts, and the timing is delayed after the synchronization is completed

D.

When the synchronization type is set to manual, there is no need to set the timing durationIf the synchronization type is set to be either custom waiting when synchronization starts or when waiting for customization after synchronization, you need to set the timing duration

Question 17

The N8000 file system is based on dynamic hierarchical storag. Through the multi-volume file system, you can achieve the same file system text pieces stored in different levels of storage media, such as hot data and ordinary data stored in the SSD disk and SATA disk.

Options:

A.

True

B.

False

Question 18

In a Huawei disaster recovery plan, in order to implement the one-click disaster recovery operation for Oracle applications, you must configure the recovery in Replciation Director Plan. What configuration actions do you need to do on the Replication Director side before configuring the recovery plan? (Multiple choice.)

Options:

A.

Configure the protection group

B.

Configure the protection strategy

C.

Configure the site and register disaster recovery host

D.

Find the LUNs used by Oracle and make policy protection for these LUNs

Question 19

True or False, all OceanStor Unified Storage Array disks have the ability to store dirty data after a sudden power failure

Options:

A.

True

B.

False

Question 20

Which of the following description for Thin LUNs and Thick LUNs for OceaStor V3 storage is true?

Options:

A.

Thin LUN and thick LUN can be configured with the same capacity.

B.

Both thin LUN and thick LUN can make initial capacity allocations.

C.

The maximum capacity of thin LUNs and thick LUNs can be greater than or equal to the available capacity of the storage pool where they reside.

D.

Both thin LUNs and thick LUNs can be created in bulk.

Question 21

OceanStor V 3 storage SmartPatition can allocate independent cache space for different LUNs. The capacity of the cache space is read and write.

use.

Options:

A.

Correct

B.

mistakes

Question 22

In a clustered environment, data is placed on the shared storage, and identities between peers are equal and have the same access to the data. It is required that the clusterware have a control mechanism for concurrent access to such peer permissions. In Oracle RAC, you use the _____ mechanism to do multiple node-to-node collisions control of access.

Options:

A.

vip

B.

ocr

C.

dlm

D.

asm

Question 23

Which of the following are correct regarding a Storage Array RAID 2.0 Typical Application Performance Tuning? (multiple choice)

Options:

A.

Scenario: Sequencing large IO services, especially 1M IO scenarios, with the phenomenon that the back-end read bandwidth is much larger than the front-end read bandwidthTuning: Turn off the corresponding LUN prefetch policy

B.

scene: the order of pressure reading and writing business conditions, high utilization of hard drivesTuning means: increase the unplug-thresh device hard disk device

C.

Scenario: Oracle database in the operation of data backup, the data on the LUN bandwidth does not meet the requirements and accompanied by high utilization of hard diskTuning means: the formal creation of POOL to increase the depth of the points

D.

Scenario: In the case of single concurrent or low concurrent read service, the delay is found to be largeTuning means: change disk unplug 8 Modify unplug - thresh increased from 4 to 8

Question 24

The InfoEqualizer DNS IP address needs to be the same as the OceanStor 9000 front-end network and customer application network for network interoperability

Options:

A.

Correct

B.

mistakes

Question 25

When installing Simpana, the client agent is installed on the server. There are two configured IP cards that the administrator how to set up, how should this be done?

Options:

A.

Add data interface pair

B.

configure the firewall

C.

Add host resolution

D.

Configure the host route

Question 26

A customer project deploys an 8-node OceanStor 9000 C Node with full front-end and back-end IB networking. The device is powered on and completes all front-end network ports. During customer front-end business switch interoperability testing, engineers will perform Oceanstor 9000 software installation and deployment. What is considered a best practice for this?

Options:

A.

The engineer thinks the installation PC is connected to NIC1 to complete the software deployment, so connect the installation PC to NIC1

B.

Direct Deployment of Software Without Disconnecting Front End Network and All Network Nodes

C.

Software Deployment Before starting, the engineer configures a temporary back-end IP address on the back end network port B3-0 of the 9000 node (connected to the installation PC)Department DHCP server

D.

The installation of PC directly through the network cable connected to the OM management network switch to complete the software deployment

Question 27

Which of the following descriptions about the InfoEqualizer features of the OceanStor 9000 storage system are incorrect. (Multiple Selections)

Options:

A.

Dynamic domain name, which returns the dynamic IP address of the node for the client, supports the failover function and is recommended for CIFS protocol sharing

B.

Static domain name, which returns the domain name of the node's static external IP address to clients, is recommended for NFS protocol sharing

C.

dynamic external IP address, node failure, the dynamic IP address can be automatically assigned to other working nodes, the client can pass againThis IP address is connected to the OceanStor 9000

D.

static external IP address, the node fails, the client can not access the oceanstor 9000 through the IP address

Question 28

Existing set customer of database uses a raw device, due to the large amount of data in the database. The customer plans to replace the old storage with new storage devices.

In the process of environmental inspection lvcb engineers found the following:

#getlvcb -TA sjklv

Intrapolicy =

copies = 0

interpolicy =

lvid =

lvname =

label =

machine id =

number Ips = 0

relocatable =

strict =

stripe width = 0

stripe size in exponent = 0

type =

upperbound = 0

fs =

time created = time modified =

As the vg is too large, the expansion of vg is impossible. As the service window is very short, and customers do not want to avoid the risk of large adjustments of the whole original environment, what is the recommended approach?

Options:

A.

Based on lvcb offset reconstruction nude equipment, and the database level 0 backup import

B.

Use the dd command for data migration

C.

Use the cplv command for data migration

D.

Use migratepv for data migration

Question 29

To cluster the server's public IP address in an Oracle RAC deployment process, a private IP address is written to the / etc / hosts file, along with the Virtual IP address, cluster unique access IP address and public IP. Which of the following configuration is correct? (all subnet masks are 255.255.255.0)

Options:

A.

127.0.0.1 localhost129.22.221.200 cluster-scan129.22.221.201 node1129.22.221.211 node1-vip192.168.222.211 node1-priv129.22.221.202 node2129.22.221.212 node2-vip192.168.222.212 node2-priv

B.

127.0.0.1 localhost129.22.221.200 cluster-scan129.22.221.201 node1129.22.221.211 node1-vip192.168.222.211 node1-priv129.22.221.202 node2129.22.221.212 node2-vip192.168.221.212 node2-priv

C.

127.0.0.1 localhost129.22.222.200 cluster-scan129.22.221.201 node1129.22.221.211 node1-vip192.168.222.211 node1-priv129.22.221.202 node2129.22.221.212 node2-vip192.168.222.212 node2-priv

D.

127.0.0.1 localhost129.22.221.200 cluster-scan129.22.222.201 node1129.22.221.211 node1-vip192.168.222.211 node1-priv129.22.221.202 node2129.22.221.212 node2-vip192.168.222.212 node2-priv

Question 30

Which of the following statements are a correct description of the CIFS agreement? (multiple choice)

Options:

A.

CIFS does not allow multiple clients to access

B.

The CIFS client writes the shared file and does not write to the storage system immediately. Instead, the file is saved in the local cache and can be read againImprove read rate, improve performance

C.

CIFS does not support anonymous transmission and shared authentication access

D.

CIFS supports a variety of character sets to ensure CIFS can be used in all language systems

Question 31

Which of the following is not an authentication method supported by the OceanStor 9000 NFS protocol?

Options:

A.

LDAP authentication

B.

WSSE certification

C.

NIS certification

D.

AD domain certification

Question 32

VMware's storage resources can be provided through VMFS, native direct-attached storage via ESXi host-FC / FCOE or iSCSI link of the shared storage. You can also share the file system over the NFS network to support third-party NAS storage.

Options:

A.

True

B.

False

Question 33

The RMAN command dbms-rcvcat in the three PL / SQL packages is used to query the recovery catalog and target database control files, such as the list, report commands or a call to the package.

Options:

A.

True

B.

False

Question 34

When planning a dual-active disaster recovery solution, the business end adopts the cluster application. Which of the following cluster applications can support the AA working mode?

Options:

A.

MSCS

B.

oracle RAC

C.

HACMP

D.

SQL server

Question 35

In a A VTL6900-I system, the backup server connected to it is the Linux operating system. The backup server and the VTL6900-I system are directly connected through the FC.

The server identifies the device information as shown below. After the backup server is configured as a backup client for the VTL6900-I system and the backup VTL system on the server virtual library process, which the following operation and description is correct:

(Multiple choice.)

Options:

A.

When configuring the backup client on the VTL side, you need to know that the WWPN of the FC port that connects the VTL to the VTL is available on the server in the sys /class / fc_host directory and subdirectory to the corresponding WWPN port.

B.

Server-side identification has been detected with the library device command is cat / proc / scsi / scsi.

C.

As shown in the figure, among the devices identified on the server side, the device labeled 1 is the scanned library.

D.

As shown in the figure, of the devices identified on the server side, the device labeled 2 is the information for the scanned tape.

Question 36

Which of the following feature is correct about the OceanStor V3 volume mirroring? (Multiple choice.)

Options:

A.

After creating a mirrored volume for a normal LUN, the server read-write IO results in a change as a result of internal information exchange.

B.

The amount of data actually stored on a LUN is 2G, the total copy of the data is 4G. A volume image is created for the LUN, the LUN is mirrored when the copy is generated during system creation.

C.

You can configure a volume mirror for external LUNs or configure external LUNs as mirror copies.

D.

When configuring volume mirroring, mirror copies are required from different disk domains.

Question 37

Which of the following statements are true regarding HUAWEI OceanStor 18000 Engine, SVP, Disk Enclosure, and PCI-e Switch Interconnections?

Options:

A.

SVP needs to be connected to multiple engines through two PCIe switches, and each engine controller needs to be connected to a PCIe switch to ensure that link redundancy and to improve reliability.

B.

When the control plane is connected to a network, when the engine and the PCI-e switch are interconnected, the port 0, port A3 and PCIe port can be interconnected.

C.

Huawei slot 0 and slot 5 of the OceanStor 18000 engine enclosure can be used to install SAS interface modules and interconnect disk enclosures.

Question 38

In the scenario of protecting the database, the slave uses the virtual snapshot method to verify the services of the production end and the DR-side and discover the data of the DR on the disaster recovery end. What are the possible reasons that the library can not start normally? (Multiple choice.)

Options:

A.

After a snapshot of the LUN of the redundancy site is created, the snapshot is not activated at the same time.

B.

Disaster recovery side of the data stored in the cache, not yet written to the hard disk.

C.

When creating a snapshot on the disaster recovery end LUN, the production end is copying data to the disaster recovery end.

D.

The production end and disaster recovery end adopt the disaster recovery solution of incremental LUN copy, and the incremental data link is abnormal during the synchronization.

Question 39

By which of the following technologies can vmware VDI reduce the storage space used by the virtual desktop system?

Options:

A.

View storage accelerator (VSA)

B.

Persona management

C.

Link cloning

D.

SE sparse virtual disk

Question 40

True or Falese, backup media using PTL or VTL simpana backup software can not start the deduplication function.

Options:

A.

True

B.

False

Question 41

True or False, the Huawei Oceanstor backup solution integration program is one machine.

Options:

A.

True

B.

False

Question 42

For commonly used SQL Server 2005 and 2008, users can connect to the specified server through the SQL Server Management Studio tool Database Engine. There are two connections in the connection group authentication method. Which client application connection method can provide the required landing User ID and password?

Options:

A.

SQL Server Authentication

B.

Windows authentication

C.

Log in as superuser

D.

Other ways when landing

Question 43

You want to improve host write performance on the primary storage. Two sets of OceanStor unified storage with synchronous remote replication are effective in doing this is which of the following ways? (Multiple choice.)

Options:

A.

RPO does not require 0 for the scenario, it is recommended to use asynchronous remote replication.

B.

The main storage using smart cache acceleration, speed up the main storage IO processing speed.

C.

According to the service pressure of the LUNs stored on the primary side, assign the home controllers of each LUN to the A and B controllers.

D.

If you are using an asynchronous remote replication scheme, you need to design a startup synchronization time based on the RPO metrics and consider the setting possible startup synchronization time during the business.

Question 44

In the OceanStor 18000 storage system, a 15K RPM SAS disk is used. Assuming that the average seek latency of this type of disk is 6 ms. which type of disk can provide a single disk IOPS?

Options:

A.

100

B.

150

C.

125

D.

167

Question 45

A Huawei OceanStor 9000 is externally shared using NFS and CIFS at the moment.

You want to set some parameters to improve the performance of the NFS mounted under the Linux operating system. Which of the following description is correct?

Options:

A.

Rsize / wsize, read and write the maximum size of each block, it is recommended to adjust to the maximum. General Linux operating system environment, the maximum value of 1M.

B.

Async, allowing asynchronous data write, synchronous write requirements. NFS server must brush each data into the hard disk before it can return success delay higher.

C.

Noatime, if you do not need to record the file access time, you can increase this parameter to avoid frequent access, modify the access time to open pin.

D.

Nolock, if there is a shared file between NFS clients, you can use this parameter. Reduce service-side file lock overhead.

Question 46

For commonly used SQL server 2005 and 2008, users can connect to a specific service through the SQL server management studio tool database engine. T login there are two ways to authenticate. Which mode is needed for the client application connection?

Options:

A.

sql server authentication

B.

Windows authentication

C.

Log in as super user

D.

Other ways when landing

Question 47

Users use vsphere 5.5 to build business virtualization. In the course of the operation it was found that a host was using too many SCSI reservations, leading to vmfs performance degradation. What method can be used to eliminate the root cause of SCSI reservation conflicts? (Multiple choice.)

Options:

A.

Reduce the number of snapshots.

B.

Reduce the number of virtual machines per LUN.

C.

Increase the number of LUNs and limit the number of hosts accessing the same LUN.

D.

Change the type of virtual disk created.

Question 48

Which of the following best practice descriptions of Oralce database is correct? (Multiple choice.)

Options:

A.

OLAP business query output is usually a statistical value (using group by with order by), so you can set a larger SGA-target value (relative to OLTP).

B.

It is recommended to use UDEV UUID and drive letter binding, in Linux environment configuration Oracle database, to avoid subsequent maintenance letter changes caused by the database which can not start.

C.

If the database OLTP business log write is very frequent, it is recommended that the appropriate online log file up, but it is recommended not to exceed 128MB.

D.

In Windows2008 or windows2012 operating system environment, in order to improve I / O processing efficiency, MBR partition is created, and diskpart command is recommended to set the partition alignment.

Question 49

Which of the following information about the InfoEqualizer function of Huawei OceanStor 9000 is correct? (Multiple choice)

Options:

A.

When using the InfoEqualizer function, you need to configure DNS. If you use an external DNS server, when configuring the DNS server, there is a setting of "reverse lookup zone name", network ID setting in this tab, you need to input network ID in reverse order.

B.

When there is a DNS server in the user network, the DNS server in the user network does not need to configure the forwarding record. When the user network without DNS service server, configure the InfoEqualizer DNS IP address as the DNS server's address on the client.

C.

The root domain name is the domain name InfoEqualizer configured for the cluster. This domain name must be configured as the fully qualified domain name, that is, the domain name that includes the root node.

D.

The domain name of the partition is configured as the relative domain name, and the root domain name of the InfoEqualizer is automatically taken as the suffix of the domain name, and the full name of the domain name is formed with maximum support of 32 partitions.

Question 50

There are multiple types of disks in a hard disk domain in the OceanStor V3 storage system. If you add one SAS disk to the hard disk domain, the topology will be load balanced as which of the following?

Options:

A.

Tier 0 disks perform data equalization.

B.

All disks in the entire hard disk domain will participate in data equalization.

C.

The CK of the target CKG will be released after data equalization is completed.

D.

OCeanstor V3 enables cross-engine data equalization.

Question 51

Which of the following is not a disaster recovery manual restart configuration necessary to restore the production system (Multiple choice.)

Options:

A.

Stop the current production business

B.

Add the remote device to the original production array

C.

With the disaster recovery array as the master LUN and the original production array as the slave LUN, create the remote replication relationship between the DR and the production end and wait for the initial synchronization to be completed.

D.

Make an incremental synchronization.

E.

Delete the original production array consistency group.

Demo: 51 questions
Total 343 questions